Maintenance, Cleaning the lens | LG Electronics BX220-JD specification

Information

Maintenance

*The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the power off and unplug the projector first.

Cleaning the lens

Clean the lens whenever you notice dirt or dust on the surface of it. Wipe the lens surface gently with an air spray or a soft, dry lint-free cloth.

To remove dirt or stains on the lens, moisten a soft cloth with water and a neutral detergent and wipe the lens surface gently.

Cleaning the Projector Case

To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with a soft, dry, lint-free cloth. To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent and then wipe the casing.

Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discolored.

32

Image 32

LG Electronics BX220-JD owner manual Maintenance, Cleaning the lens

Contents

BX220-JD DLP Projector Class a digital device Contents Safety Instructions Never touch the power plug with a wet hand Prevent dust collecting on the power plug pins or outletDo not use too many plugs on the Mains multi-outlet Do not allow any objects to fall into the projector Do not use water while cleaning the projector Is not to be used for a long peri Service personnelOnly use the specified type of battery Do not drop the projector or allow impact shock Main Body Connecting PartNames of parts Control Panel Remote Control Installing Batteries Projector Status Indicators Accessories Optional Extras Installation and Composition Installation InstructionsDon’t place the projector where it can be covered with dust Provide proper ventilation for this projector Basic Operation of the Projector Projection distance based on the picture format Using Kensington Security System Turning on the Projector Turning off the Projector Selecting source mode Focus and Position of the Screen ImageZoom ring Focus ring Each press of the F, G button changes the display as below Connecting to a Desktop PC Connecting to a Notebook PCConnection Connect computer cable to RGB Input PC/DTV of the projector Connecting to a Video Source Connecting to a DVDConnecting to a D-TV Set-Top Box RGB Input PC/DTV of the projector Adjusting Video FunctionAPC Auto Picture Control Function Gamma Function Auto Color Temperature ControlWhite Peaking Function Flip Vertical Function Selecting languageFlip Horizontal Function Auto Source Function Using ARC FunctionUsing Keystone function Selecting Blank Image color Using Blank functionLamp Mode Function Moving Image Still Image Using Still functionChecking lamp time Screen Position Clock / Phase FunctionAuto Tracking Function RS-232C How to connect external control equipmentCommunication Parameter Setup Command Reference List Communication Protocol Power Command2a Input Select Command2bAspect Ratio Command2c Screen Mute Command2d Brightness Command2h Color Command2iTint Command2j Sharpness Command2k Red ADC gain Adjustment Color R Command2w Low Power Command2qGreen ADC gain Adjustment Color G Command2y Blue ADC gain Adjustment Color B Command2z DVD/DTV Input Supported Monitor DisplayInformation Maintenance Cleaning the lens Memo Memo Specifications BX220-JDOperating Condition Projector Lamp