Furuno CSH-23F/24F manual Setting Distances Between Net Sonde Transmitters

Setting Distances Between Net Sonde Transmitters

R1

To accurately display the net shooting mark and net sonde mark position, the distance between transmitters must be correctly set. This is done on the DATA SET menu.

R0: Length of net from its end to transmitter1 in meters.

R1: Length of net between transmitters 1 and 2 in meters.

R2: Length of net between transmitters 2 and 3 in meters.

R2

R0

Figure 15-2 How to measure distances between transmitters

How to set net sonde transmitter distances

1. Press the MENU key while pressing and holding down d . The DATA SET menu appears.

DATA SET MENU NET SONDE NET SONDE XMTR

Select item with dc[ \ keys and press MENU key.

Press END key to close menu.

Qty	:
Distance 0	:
1	:
2	:

3

0m

0m

0m

t Setting range: 0 to 10 s

tSetting range: 0m to 9990m s

9:

10:

0m

0m

Figure 15-3 DATA SET menu

2.Select NET SONDE and then “Net Sonde XMTR.

3.Enter number of net sonde transmitters and distances between them.

15-2