Furuno CH-250 manual Short-cut key, Activating a short-cut key

5.3.3Short-cut key

The default settings are key [1], interference rejector; key [2], signal level, and key [3], background color. The operator may change their functions as desired.

Note: In the combination modes the short-cut key operation is only possible from the main window.

1.Select SHORT-CUT following the procedure in paragraph 5.2.1 on page 5-3.

2.Press the [MENU] key to open the menu.

3.Press to select MENU, and then press or to select SHORT-CUT.

MENU		COM1 COM2		HORZ	VERT ES	SHORT-CUT	SYS
			VOLUME		DEL TRACK	AUTO TILT BKGD
	KEY 1	VER SEARCH
		SIG LEVEL	CLUTTER		RES. COLOR	WHITE MARKER
		VER SEARCH			DEL TRACK	AUTO TILT BKGD
	KEY 2		VOLUME
		SIG LEVEL	CLUTTER		RES. COLOR	WHITE MARKER
		VER SEARCH	VOLUME			AUTO TILT BKGD
	KEY 3				DEL TRACK
		SIG LEVEL	CLUTTER		RES. COLOR	WHITE MARKER
SELECT FUNCTION TO BE ALLOCATED TO EACH CUSTOM KEY.
CUSTOM KEY MAY BE USED AS A PRESET KEY.
	: SELECT	: CHANGE		MENU: END

Figure 5-6 SHORT-CUT menu

4.Press or to select key to preset. For example select KEY 1.

5.Press or to select item.

6.Press the [MENU] key to finish.

Activating a short-cut key

1.Press a CUSTOM MODE key, and the dialog box programmed for the custom key pressed appears. The dialog box below is for CLUTTER (HORZ).

CLUTTER (HORZ): 0 1 2 3

2.Press or to select option desired

3.Press the [MENU] key to close the dialog box.

5-7