Eagle Electronics 320 Depth Range Automatic, Depth Range Manual, To switch to Manual Depth Range

1.From the Sonar Page, press MENU↓ to DEPTH CURSORENT.

2.The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to raise the cursor line.

3.To clear the depth cursor, press EXIT.

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically placed in the lower half of the screen. This is called Auto Ranging and is part of the automatic function. However, depending upon the bottom depth and the current range, you can change the range to a different depth. To do this:

1.From the Sonar Page, press MENU↓ to DEPTH RANGEENT.

2.The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif- ferent depth range. A black bar highlights the selected range. Range numbers in gray cannot be selected.

3.When the new range is selected, press EXIT to clear the menu.

Depth Range - Manual

You have complete control over the range when the unit is in the manual mode. There are 16 depth ranges, from 5 feet to 4,000 feet.

To switch to Manual Depth Range:

1.First, turn off automatic depth range. From the Sonar Page, press MENU↓ to AUTO DEPTH RANGEENT.

2.Press ↑ to DEPTH RANGEENT and the Depth Range Control Scale appears.

3.Press ↓ or ↑ to select a different depth range. A horizontal black bar highlights the selected range.

4.When the new range is selected, press EXIT to clear the

menu.

51