Eagle Electronics 320 manual Sonar Simulator, Stop Chart

Tip:

You can customize other digital data windows before returning to the Sonar Page. After changing the first window by selecting the Data Type and pressing Enter, use the ↓ key to select another win- dow to change. When the selected window title bar flashes, press ENT↑ or ↓ to select data typeENT. Repeat these steps until you're finished customizing, then press EXIT to return to the Sonar Page.

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on the water. All sonar features and functions are useable. When in simulator mode, you will see [Simulator Mode] in the Sonar Page title bar. To use the simulator:

1.From the Sonar Page, press MENUMENU↓ to SONAR SIMULATORENT.

2.Turn off Sonar Simulator by pressing MENUMENU↓ to SONAR

SIMULATORENTEXIT.

NOTE:

If you turn on your unit before attaching a transducer, it may enter a demo mode. The words "demo mode" flash on the bottom of the screen and a sonar chart plays much like the simulator. Unlike the simulator, the demo mode is for demonstration only, and will auto- matically stop as soon as you turn on the unit with a transducer at- tached. The simulator will continue to function normally.

Stop Chart

If you are running multiple units on a boat, there are times when you may want to turn off the sonar. This command turns off the sonar and stops the chart from scrolling. Sonar restarts automatically each time you turn on your unit.

1.Press MENU↓ to STOP CHARTENTEXIT.

To turn on sonar and start the chart scrolling again, repeat the above step.

74