Eagle Electronics 300 manual Bracket Installation

Bracket Installation

Recommended tools for this job include: drill, 1" (25.4 mm) drill bit,

screwdriver. Required supplies for this job include: high quality, ma- rine grade above- or below-waterline caulking compound, three #10 stainless steel screws. Screw length and type should be suitable for the material on which you intend to mount the bracket.

Mount the unit in any convenient location, provided there is clearance when it’s tilted for the best viewing angle. You should also make sure there is enough room behind the unit to attach the power/transducer cable. (See the following drawings, which show the dimensions of a gimbal-mounted Cuda 300 sonar unit.)

107.5	82.7
	[3.26]
[4.23]

156

[6.26]

	12.09 [0.48]
76.9	Millimeter	70.3
[3.03]	[Inch]	[2.77]

Front view (left) and side view (right) showing dimensions of the Cuda 300 when mounted on quick release bracket.

15