Contents of Network setup menu

Item		Description			Default Setting

IP ADDRESS	This address is assigned at the factory. Change the
	address (last three digits; 001 to 254) when like
	models are connected directly or through the hub. Do				Radar:
	this change before connecting the equipment to the				172.031.003.003
	other equipment or hub to distinguish. Do not set the
	same IP address in the network.

HOST NAME	Set the name for your display unit to distinguish it from				MODEL series:
	others in the NavNet system. Confirm that two				MODEL series:
	others in the NavNet system. Confirm that two				RADAR
	equipment don’t have same host names. The host				RADAR
	equipment don’t have same host names. The host
	name has been preset depending on the series of
	name has been preset depending on the series of				GD-1900C:
	NavNet. See the table in below. This host name is				GD-1900C:
	used for RADAR SOURCE and CHART SOURCE.				PLOTTER

RADAR SOURCE	Enter the host name “RADAR (preset)” or the new
	name set at HOST NAME item setting if the unit has
	been changed of the network radar to use for the radar				RADAR
	display. Clear the RADAR SOURCE name when your
	equipment is GD-1900C and no radar is connected.

CHART SOURCE	Enter a host name (set at HOST NAME) of network
	display unit to select equipment which has chart card				None
	in its slot (Max. three units) to use. The driver names				None
	of the memory card interface unit (option) are
	MCDRIVE-1 (left side) and MCDRIVE-2 (right side).
SOUNDER SOURCE	The host name of the network sounder ETR-6/10N or
	ETR-30N is preset (SOUNDER) to use for the video				SOUNDER
	sounder display. Clear the host name when no				SOUNDER
	sounder display. Clear the host name when no
	network sounder is connected.

AUX SOURCE	For the facsimile receiver FAX-30. Use the default				WX FAX
	setting.				WX FAX
	setting.

SUBNET MASK					255.255.000.000

GATEWAY ADDRESS	Not used. Reserved for future use.				000.000.000.000
	Not used. Reserved for future use.
OFFSET PORT					10000
NUMBER					10000
NUMBER

	NavNet equipment default settings

Model			IP ADDRESS	HOST NAME

MODEL1722/1732/1742/1762			172.031.003.004	RADAR

MODEL1722C/1732C/1742C/1762C/1752C			172.031.003.001	RADAR

MODEL1833/1933/1943			172.031.003.002	RADAR

MODEL1823C/1833C/1933C/1943C/1953C			172.031.003.003	RADAR

GD-1700/1700C			172.031.014.001	PLOTTER

GD-1900C			172.031.003.003	PLOTTER

CU-200			172.031.014.100	MCDRIVE

3-3

1823C, 1833C, GD-1900C, 1933C, 1953C specifications

Furuno is a well-respected name in marine electronics, renowned for producing high-quality navigation and fish-finding equipment. Among their product line, the Furuno 1943C, 1953C, 1933C, GD-1900C, and 1833C stand out as reliable radar systems, providing exceptional performance and advanced features for both commercial and recreational vessels.

The Furuno 1943C is a powerful 12 kW radar system, boasting a 10.4-inch monochrome display with a user-friendly interface. It is equipped with digital signal processing (DSP) technology that enhances target detection and resolution. The 1943C offers superior target tracking capabilities, even in challenging weather conditions. Its patented Auto Gain Control ensures that small targets are not lost in clutter, making it a favorite among serious navigators.

Moving on to the Furuno 1953C, this model has an impressive 12 kW output and features a high-resolution 15-inch color display. It integrates advanced features such as Automatic Radar Plotting Aid (ARPA) for tracking multiple targets simultaneously, increasing situational awareness and safety on the water. Additionally, the 1953C offers a range of presentation modes, allowing users to customize the display to their specific needs.

The Furuno 1933C is a compact yet efficient radar solution with a 6 kW output and a 10.4-inch monochrome display. This system is highly regarded for its reliable performance and ease of use. Its user-friendly interface makes navigation simple, while features such as Target Analyzer and Echo Trails aid in identifying potential hazards, ensuring safe passage through busy waterways.

The Furuno GD-1900C combines chartplotting and radar in a single unit. With a 10.4-inch color display, it provides clear visuals of radar data as well as navigation charts. The GD-1900C supports various chart formats, including C-MAP and Navionics, allowing boaters to access detailed navigational information. This system is especially useful for those who need both radar and chartplotting capabilities in a space-saving design.

Lastly, the Furuno 1833C is a versatile radar system with a 4 kW output and a 7-inch color display, catering to smaller vessels. It features Furuno's advanced technology, such as a built-in GPS receiver and the ability to overlay radar data on electronic charts. This model is ideal for recreational boaters seeking an affordable yet feature-rich radar solution.

In summary, Furuno’s range of radar systems, including the 1943C, 1953C, 1933C, GD-1900C, and 1833C, demonstrates the brand’s commitment to quality and innovation in marine technology. Each unit incorporates advanced features tailored to meet the diverse needs of boaters, ensuring safe and efficient navigation on the water.

Contents of Network setup menu

NavNet equipment default settings

1823C, 1833C, GD-1900C, 1933C, 1953C specifications