Furuno 1933C, 1943C, 1833C, 1823C, GD-1900C Setting up Data Ports, DATA1, DATA2, Data 4 Port menus

3.6Setting up Data Ports

Setup the data ports according to the equipment connected to them as follows.

1.Press the [MENU] key to open the menu.

2.Press the SYSTEM CONFIGURATION, SYSTEM SETUP and PORT SETUP soft keys.

3.Press the GPS/NMEA PORT for DATA 1 port, NMEA PORT for DATA 2 port, PC/NMEA EXT, BUZZ PORT for DATA 4 port soft key as appropriate. One of the following displays appears depending on your selection.

FURUNO GPS SENSOR		YES	GPS/￿				NMEA￿
			PORT	FURUNO GPS SENSOR		NO	PORT
OUTPUT FORMAT		NMEA0183		OUTPUT FORMAT		NMEA0183
		Ver 2.0				Ver 2.0	EDIT
LAT/LON FORMAT		DD˚ MM.MMM' EDIT		LAT/LON FORMAT		DD˚ MM.MMM'
OUTPUT DESTINATION		NO	SELECT	OUTPUT DESTINATION		NO	SELECT
			SNTNC				SNTNC
WIRING INFORMATION				WIRING INFORMATION
TD-A >1>---WHITE
TD-B >2>---BLUE			RETURN	TD-A >1>---WHITE			RETURN
				TD-B >2>---BLACK
RD-A>3>---YELLOW
				RD-A>3>---YELLOW
RD-B>4>---GREEN
				RD-B>4>---GREEN
+12V>5>---RED				NC	>5>
GND >6>---BLACK				FG	>6>---SHIELD
FG	>7>---SHIELD

DATA 1 port DATA 2 port

		NMEA￿
▲NMEA OUTPUT FORMAT NMEA VER. 2.0		PORT
BAUD RATE	4800bps
BIT LENGTH	8 bits	EDIT
STOP BIT	1 bit
PARITY	NONE	SELECT
(CONTROL: Xon/Xoff)		SNTNC
WIRING INFORMATION
TxD	>1>---WHITE	RETURN
RxD	>2>---BLUE
RD-A	>3>---YELLOW
RD-B	>4>---GREEN
+12V	>5>---RED
EXT BUZZ>6>---BLACK
GND	>7>---SHIELD

DATA 4 port

DATA1, DATA2, DATA 4 PORT menus

4.Select item and press the EDIT soft key.

5.Set option referring to the tables on pages 3-17 and 3-18.

6.To select NMEA data sentences to output, press the SELECT SNTNC soft key.

For NETWORK port, select the sentence to output to the network equipment (default: all

OFF).

3-16