Furuno GP-1650WD installation manual Dgps port, RTCM104 Output

3. INITIAL SETTINGS

DGPS port

Set the following when connecting with DGPS beacon receiver GR-80 or the DGPS beacon receiver is incorporated, PC to the DGPS port.

Note: Signal level for DGPS port is RS232C.

1.Press the [MENU] key.

2.Press the CONFIGURATION soft key.

3.Press the SETUP NMEA/DGPS PORT 2 soft key.

4.Select FORMAT, and then press the EDIT soft key. The following window appears.

	OUTPUT FORMATNMEA 0183		SETUP
▲FORMAT			PORT2
	▲	VER 1.5▲▲▲
		NMEA0183 Ver1.5
		NMEA0183 Ver2.0
		RTCM104 (EXTRN)
		RTCM104 (INTRN)
		RTCM104 (OUTPUT)
	▼		ENTER
DGPS 3D			CANCEL

Output format window (PORT 2)

5. Select NMEA version. The selected item is indicated by black button.

NMEA0183 Ver1.5/2.0:	Select one when connecting PC or RS-232C equipment.
RTCM104 (EXTERN):	Select this when connecting external DGPS beacon receiver.
RTCM104 (INTRN):	Select this for built in internal DGPS beacon receiver.
RTCM104 (OUTPUT):	Select this when outputting differential data of the internal
	DGPS beacon receiver to other GPS navigator.

Note 1: Note that you cannot setup sentences when you select RTCM104 at the format.

Note 2: For RS-422 format, the level converter (IF-1432) is required for connection of external equipment.

6.Press the ENTER soft key.

7.Press the [PLOT] key to finish.

9