Furuno GP-1650WD installation manual Chassis assembly, Handling of Coaxial Cable

4.INCORPORATION OF DGPS BEACON RECEIVER KIT (for GP-1650W)

4.Dismount heat sink from chassis assembly by unfastening four screws on the ANLG board and disconnecting the connector of the mini pin coaxial cable.

Handling of Coaxial Cable

•Do not touch the connector with bare hands; use gloves.

•Use radio pincers to remove, and pull out straightly.

•Plug in connector straightly.

Screws X 4

ANLG board

Mini pin connector

GN-8091

A

Mini pin coax. cable

Heat sink

Chassis assembly

5.Take off the mini pin coaxial cable from J2 on the GN-8091.

6.Open the lid of GR-7000A

7.Connect cable assy. S.FL2-2LP0.7-D-WHT (175) (supplied) to J1 of GR-7000A

17