4. INCORPORATION OF DGPS BEACON RECEIVER KIT (for
Checking the beacon receiver
1.Press the [MENU] key.
2.Press the CONFIGURATION soft key.
3.Press the SYSTEM MENU soft key.
4.Press the SELF TEST soft key.
5.Press the MEMORY•I/O TEST soft key to display the following message.
TEST
PRPGRAM:OK
NO.14518010XX
SRAM:OK
DRAM:OK
PORT1:OK*
PORT2:OK*
INTERNAL BATTERY: OK
GPS RECEIVER:OK
NO.48502060XX
BEACON RECEIVER:OK
NO.08501781XX
NO.08501791XX
RETURN
*Special connections are required to check these ports. Otherwise, NG appears.
Memory, I/O Test Display
6.Confirm that BEACON RECEIVER: OK is displayed.
7.Press the RETURN soft key.
8.Press the [PLOT] key to return the plotter display.
22