Furuno GP-1600F manual Erasing Waypoints, Setting/Canceling Destination Waypoint

2.9 Erasing Waypoints

The GP-1600F provides two ways by which you can erase waypoints:

•by the cursor, or

•through the waypoint list.

Erasing waypoints by the cursor

1)Press the [CURS] key to turn on the cursor.

2)Operate the [Arrow] keys to place the cursor on the waypoint you want to erase.

3)Press the [CLR] key.

Erasing waypoints through the waypoint list

1)Press the [WPT] key.

2)Press the [▲] key to select WPT List.

3)Press the [NU/CU ENT] key. The waypoint list appears.

4)Press the [▲] or [▼] key to select waypoint number.

5)Press the [CLR] key. The confirmation window appears.

6)Press the [NU/CU ENT] key.

2.10Setting/Canceling Destination Waypoint

The GP-1600F offers three methods by which you can set destina- tion:

•by waypoint in waypoint list

•by event list (discussed later in this chapter)

•by route list (discussed later in this chapter).

When you select a destination waypoint, range and bearing from own ship to that point appear at the bottom of the display.

Setting destination by waypoint number

1)Press the [GOTO] key.

The following menu appears.

2 – 12