FujiFilm FinePix S1 owner manual Setting appears on the rear display panel. Press, Function button

Rear Display Panel Setting the Image Size (Number of Pixels)

■Use the procedure below to set the number of pixels (image size) used to record photographed images.

1	Press the “FUNC” button.
2	The	icon for the image size (number of pixels)
	setting appears on the rear display panel. Press

function button [4].

With the image size (number of pixels) set to “3040× 2016 pixels”

•The display changes in the cycle shown below each time function button

[4]is pressed.

3040

2304

1440

•The same settings can also be selected by holding down function button

[4]and pressing “a” on the 4-direction button. You can select settings in the reverse order by holding down function button [4] and pressing “b” on the 4-direction button.

Display	Name	Description
	3040	This setting sets the image size to 3040	× 2016 pixels. At this
	(default)	setting, the smallest number of images can be recorded.
	2304	This setting sets the image size to 2304	× 1536 pixels.
	1440	This setting sets the image size to 1440	× 960 pixels. At this
		setting, the largest number of images can be recorded.

44