FujiFilm FinePix S1 owner manual 127

Item

Display	Information display
	Color LCD monitor
I/Osockets	Video out
	DC input
	Digital (USB)
	Auto Power Off
	Battery check
Functions	White balance
Main
	Playback
	Erase modes
	Image quality settings
	Other
	Dimensions
	Mass (Weight)
	Power	Image
	supply	processor
General		Camera
	Number of shots using
	batteries*2
	Operating conditions

Accessories

Specifications

Viewfinder display

Top display panel

Rear display panel (backlit)

2-inch 200,000-pixel low-temperature polysilicon TFT

mini pin jack (3.5-mm dia.) (NTSC/PAL)

Data downloading to PC and taking pictures your PC

Used to connect AC Power Adapter AC-5VH

Off, 2 min. or 5 min. (disabled during auto playback and when the camera operates connected to a PC)

•Battery checking performed on camera and at image processor respectively. However, checking is performed on the camera when the battery adapter is used.

•Check levels: 3 levels (full, flat and low)

If the battery capacity is insufficient in either the image processor or camera, a warning is displayed for 3 seconds and then the Auto Power Off function is triggered.

AUTO, Sunny, Shade, Fluorescent 1, Fluorescent2, Fluorescent3, Incandescent and Custom

Single-frame, 4-frame, 9-frame, Playback zoom, Histogram and Auto-play

Format, All frames, Single frame

Color, Tone, Sharpness

DPOF, Multi-exposure, Frame no. memory, Custom WB setting, Standard chart

148.5× 125 × 79.5 mm (5.8 × 4.9 × 3.1in.) (excluding LCD screen and attachments)

800 g (28.2oz.) (body only, not including batteries)

4 AA-size batteries (alkaline (provided),

Ni-MH (sold separately) or Ni-Cd (sold separately)) Special AC Power Adapter AC-5VH (sold separately)

CR2025 lithium button cell battery (supplied, for clock and settings backup)

2 CR123A lithium batteries (provided)

Power also available from image processor using battery adapter. However, the built-in flash cannot be used when the battery adapter is used.

Approx. 650 (without previews, recorded on SmartMedia, built-in flash off)

(with Ni-MH batteries (HR-3UF) used in image processor and CR123A lithium batteries used in camera)

Temperature: 0°C to +40°C. (+32°F to +104°F) (Note that the range for Microdrive is +5°C to +40°C (+41°F to +104°F).) Humidity: 80% or less (no condensation)

See P.9.

*2 This is a guide to the number of consecutive shots that can be taken at normal temperatures. Actual numbers may vary depending on the camera’s operating conditions and the amount of charge in the batteries.

5

127