FujiFilm FinePix S1 owner manual Using the USB Cable and Software Included

Using the USB Cable and Software Included - continued

4	Plug the small plug on the cable provided into the
	digital (USB) socket on the camera and then plug the
	other end of the cable into the USB port on the
	computer. When you switch on the computer, the
	“	” icon appears on the camera’s rear display panel.

•Use only the special cable provided.

•When the “!BUSY” message appears on the rear display panel, this indicates that the camera is being accessed. Never open the slot cover or disconnect the cable while the camera is being accessed. This can prevent correct data downloading and cause camera malfunctions.

Downloading mode Shooting mode

■Replacing Media (Downloading mode)

●On Windows 98

Check that the camera is not being accessed, switch the camera off and replace the media.

●On Windows 2000 Professional

Check that the camera is not being accessed, click on the Eject button in the taskbar, and then switch the camera off and replace the media.

●On a Macintosh

Drag the removable disk icon on the desktop to the Trash. Once the “REMOVE OK” message has appeared on the rear display panel, switch the camera off and replace the disk.

•If you open the slot cover without switching the camera off, the “Ü” warning appears on the top display panel. If this occurs, switch the camera off and then on again.

•You should use the optional AC Power Adapter AC-5VH (sold separately) and the battery adapter. Data cannot be downloaded if the power fails during downloading.

•The Auto Power Off function does not operate when the camera is connected to a PC.

112