Erasing Single Recorded Images

 

Use the procedure below to erase recorded images.

 

To erase all the recorded images, see P.86.

1

Display the image to be erased. (See “To View Images

(Playback)”.)

2

When you press function button [2], the image is

displayed on the rear display panel for erase

confirmation.

• If the image is protected (P.88), the error tone sounds and an error

 

message is displayed for about 3 seconds.

 

• If DPOF settings have been specified for the image, the error tone

 

sounds and an erase confirmation message is displayed. Check the

 

image and then proceed to step 3.

3

Press function key [4] to erase the selected image. The

next recorded image then appears.

1

To cancel the procedure, press function key [1].

To continue erasing images, repeat steps 2 and 3.

35

Page 35
Image 35
FujiFilm FinePix S1 Erasing Single Recorded Images, When you press function button 2, the image is, Confirmation