Releasing the Shutter | FujiFilm FinePix S1 manual

11 Releasing the Shutter

■Check that the focus indicator “●” is lit and then slowly press the shutter button down fully to release the shutter.

1	Press the shutter button halfway and check the
1	viewfinder display.

	• If the flash recommended icon “j” is flashing in the viewfinder display,
	use the built-in flash (☞ P.74, 76).
	• If a warning is displayed on the top display panel or viewfinder display,
	refer to P.121 and P.122 for information on how to respond.
2	Check that the focus indicator “●” is lit and then gently
2	press the shutter button fully.

•The “REC” icon flashes on the rear display panel while the image is being recorded.

•The shutter does not release during recording when Preview mode is set to ON.

•If the number of prints display is highlighted, the shutter will not release even when the focus indicator “●” is lit.

•When there is no media loaded, you can display and review an image but you can not record it.

30

Image 30

FujiFilm FinePix S1 Releasing the Shutter, Press the shutter button halfway and check, Press the shutter button fully

Contents

Basic Photography Setup Advanced Photography Preference For customers in the U.S.A FCC Statement For customers in Canada EC Declaration of Conformity Contents Focus Lock Photography Shooting Using Exposure Modes Setting the Image Size Number of PixelsSpecifying a Custom WB Setting Shooting Using 5-Vari Programs Contents Reference Preface Preparatory Trial Shots Accessories Camera Features and AccessoriesFeatures Camera Body Cap Nomenclature AE lock button P.70 Command dial Nomenclature Rear Display Panel Screens Display during photography Top Display Panel Liquid crystal in the display panels and viewfinder display Viewfinder Display Mount on the camera body Attaching the Shoulder StrapPass the end of the shoulder strap through the strap Pass the end of the strap through the fastener a On the lithium battery compartment cover Loading the Camera BatteriesLoading the Lithium Batteries Loading the Camera Batteries Loading the AA Batteries Power socket Insert the battery adapter as shown in the figureFirmly close the battery compartment cover 5V socket on the camera and plug the AC-5VH into Switch the camera off and mount the camera lens Mounting the Camera LensAperture ring When the camera is stored with the lens detached To detach the lens from the camera body On or OFF respectively. When you switch Switching the Camera On and OffTo switch the camera on or off, set the power switch to Camera on, the battery check icon I appears Setting the Date and Time Press the MENU/EXE button. The SET-UP menuAppears on the color LCD monitor Insert the media. Load a Microdrive or a CompactFlash Switch the camera OFF, open the slot coverLoading Media Close the slot cover Switch the camera OFF and open the slot cover Removing MediaEject the media Symbol Name Features and Typical Uses Exposure Modes on the FinePix S1 Pro Setting the Exposure Mode Dial Set the focus mode selector switch to AF autoFocus Holding the Camera and Focusing Hold the camera correctlyCamera shake and shutter speed Compose your shot and press the shutter button Halfway to set the focus Press the shutter button halfway and check Check that the focus indicator is lit and then gentlyReleasing the Shutter Press the shutter button fully Playing Back Photographed Images Playing Back Photographed Images On the color LCD monitor Multi-frame PlaybackPress the Play button to display the recorded image Press the MENU/EXE button to display the menu Press a or b on the 4-direction button to select Multi or 9-MULTIPress the MENU/EXE button to begin multi-frame Displayed on the rear display panel for erase When you press function button 2, the image isErasing Single Recorded Images Confirmation TV. You can then take pictures and play back Input socket on the TV and switch on the cameraPlug the pin-plug end of the video cable into the video Images in the usual way Background a Brief Guide Focusing and Exposure Focus and Depth of Field Setup Functions Setting Display Factory Description Default Preview OFF Rear Display Panel Setting the White Balance Press the Func buttonRear display panel. Press function button Display Name Description Light source for the shot is the sun Rear Display Panel Setting the Sensitivity Icon for the ISO sensitivity setting appears on Rear Display Panel Setting the Image Quality Icon for the quality setting appears on Setting appears on the rear display panel. Press Function button Icon for the color setting appears on the rear Press the Func button twiceDisplay panel. Press function button Icon for the tone setting appears on the rear Hard Rear Display Panel Setting the Sharpness Icon for the sharpness setting appears on Rear Display Panel Setting Multi-exposure Icon for the multi-exposure setting appearsOn the rear display panel. Press function button Preview and then use d or c on the 4-direction Button to select the Preview settingWhen you have selected the setting, select END Press the MENU/EXE button SET-UP Menu Part 1 Specifying a Custom WB Setting White paper, that occupies an area larger than Button to select the Hi Mode setting Hi ModeMode and then press d or c on the 4-direction Press a or b on the 4-direction button to select Hi SET-UP Menu Part 1 Self TIMER/AUTO Power OFF Frame No. and then press d or c on Direction button to select the frame number memoryUsed Button to select the beep setting PC Mode and then press d or c onDirection button to select the PC Mode setting Beep and then press d or c on the 4-direction Language Hold down the exposure compensation button h Reset /Camera ResetCamera Reset Aperture button g for 2 or more seconds Focusing Modes When the Focusing Mode is Set to AF auto focusAuxiliary AF Light Continuous use of the auxiliary AF light Focusing ModesWhen M manual focus is Selected Nikon flash units and active auxiliary flash Focus Lock Photography Check that the focus indicator is lit and take Shooting Using Exposure ModesSet the exposure mode dial to z Auto Programmed Auto Program Shift Shooting Using Exposure Modes Speed on the command dial 1/2000 to 30 secShutter-priority Auto Setting narrowest aperture to widest aperture on Aperture-priority Auto Set the shutter speed and aperture setting while Manual Exposure Indicator Shooting Using 5-Vari Programs Points to note when using 5-vari programsVari Programs Vari Program Types and Features Portrait mode Shooting Using 5-Vari Programs Sport mode continuous shooting Center-weighted Metering Metering ModesMulti-pattern Metering and 3D 6-zone Multi-pattern Metering AE Lock Photography Position your subject in the center of the image, holdShutter button halfway and press the AE-L AE Compose the picture, focus and shoot Set the amount of compensation on the command dialExposure Compensation 320 400 On the top display panel Self-timer PhotographyPress the self-timer button !. The ! icon appears Compose the shot, focus and then press the shutter Diopter Adjustment Function/Eyepiece Cap Points to watch when sliding the diopter adjustment knob Flash Photography Built-in Flash and TTL-BL Flash ControlFlash Control Range Effective Flash range Synchro Mode Types and Features Red-eye reduction mode Exposure Mode Valid Shutter Speeds Valid Apertures Ref. Set the exposure mode and check the shutter speedAperture setting Flash Photography Flash Intensity Check that the Ready icon j is displayedStay within the flash control range P.74 Lenses that Can Be Used with the Built-in Flash Nikon Flash Units that Can Be Used Selected Sensitivity ISO 320 400 Combining Modes Take a picture in the normal way Preview SetupShooting and Recording Previews Press function button 1 or press the MENU/EXE Standard Chart Display Press function button 3 to select the histogram you Histogram DisplayDisplay the preview image P.49 Want to view To record the overlaid images, press function button Multi-exposure SetupMulti-exposure Or press the MENU/EXE button Playback Functions Function DescriptionPage Erase ALL or Format procedure ends Press the MENU/EXE button and then select YES toExecute Erase ALL or Format Protection Settings Containing the images for which protection is to be set Protecting and Unprotecting All ImagesOn the rear display panel, check the media type Or removed Check the confirmation message and then press Protection SettingsALL if you want to protect the images or ALL is selected Dpof Settings Dpof file Press the Play button and then the MENU/EXE Dpof SettingsSetting or Cancelling Date/Time Imprinting Button to display the menu You want to specify the Dpof settings Press function button Either Date on or Date OFF. The selected settingSpecifying Dpof Settings for Single Frame Press d or c on the 4-direction button to select Prints for the image Settings screen appears. Press a on the 4-directionPress function button 1 or 3 to specify the number Press a on the 4-direction button. The trimming Press function button REVIEW/CANCEL Setting Dpof Settings for All the Images SET ALL Which you want to store Dpof information Check the number of stored Dpof prints and then Cancelling Dpof Settings for All Frames Cancel ALL Which you want to cancel the Dpof information Check the number of prints for which Dpof settings Are to be canceled and then press the MENU/EXE100 Auto Play Settings Auto Play Automatic Playback101 Auto Play time setting and then press d or c to set Auto Play Automatic Playback102 Adjusting the Color LCD Monitor Brightness Brightness menu103 Press the MENU/EXE button to confirm the setting Adjusting the Color LCD Monitor BrightnessPress d or c on the 4-direction button to adjust Brightness System Expansion Options 105Reference Lenses that Can Be Used with this Camera 106 107 Optional Accessories Guide 108 109 Compatible OS Compatible SmartMedia FD-A1/A1S/A1NFD-A2 Explanation of Terms 110 Using the USB Cable and Software Included Plug the small plug on the cable provided into Using the USB Cable and Software IncludedComputer. When you switch on the computer, Digital USB socket on the camera and then plug 113 Places to Avoid Dust inside the camera and on the surface of the CCD Cleaning the CCD114 Preventing Soiling of the CCD 115 Points to Note when Cleaning the CCD Cleaning the CCDHold down both the self-timer button ! and the AE Use a blower to remove any soiling on the CCD surface Power Supply Notes Batteries that Can Be Used117 Power Supply Notes 118 119 SmartMedia SmartMedia Specifications 120 Problem Cause Solution 121 122 123 Troubleshooting 124 125 Specifications Specifications126 127 Uses Symptoms When Depleted SpecificationsBatteries Uses and Symptoms When Batteries are Depleted Standard Number of Available Shots Recorded Images Do not allow water or foreign objects to enter the camera Safety Notes129 Do not put the camera down on an unstable surface Safety Notes 130 Do not leave the camera in unusually hot locations Regularly request internal inspections and cleaning131 Do not place heavy objects on the camera 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan