FujiFilm FinePix S1 owner manual Insert the battery adapter as shown in the figure, Power socket

Using the AC Power Adapter AC-5VH (optional)

1	Open the lithium battery compartment cover as
	described in step 1 in “Loading the Lithium Batteries”.
	• When the camera is connected to a personal computer or you are
	viewing recorded images on a TV so that the camera is switched on for
	an extended period, you should use the AC-5VH.
	When you use the AC-5VH, you can load the battery adapter (supplied)
	instead of the lithium batteries to prevent the lithium batteries being
	depleted.
	However, bear in mind that you cannot use the built-in flash when you
	are using the battery adapter.
2	Insert the battery adapter as shown in the figure and
	firmly close the battery compartment cover.

☞Note

Notes on using the battery adapter

When you use the battery adapter, use the AC-5VH or AA-size Ni-MH batteries.

3	Insert the connection plug for the AC-5VH into the DC IN
	5V socket on the camera and plug the AC-5VH into the

power socket.

•To remove the battery adapter, grasp the catch with your fingers and lift the adapter out.

1

•The socket-outlet shall installed near the equipment and shall be easily accessible.

•The shapes of the AC-5VH, plug and socket-outlet depends on the country of use.

•You cannot charge the batteries by connecting the AC- 5VH.

19