Loading Media, Close the slot cover | FujiFilm FinePix S1 guide

6 Loading Media

1	Switch the camera “OFF”, open the slot cover and
	insert the media. Load a Microdrive or a CompactFlash

card into the upper slot and a SmartMedia into the lower slot.

For a SmartMedia

•Insert a SmartMedia with the contact area (gold-colored area) facing upwards.

•Insert a Microdrive or a CompactFlash card in the correct direction and push it smoothly all the way into the slot.

2 Close the slot cover.

•If there is a write-protect sticker on the SmartMedia, data cannot be recorded onto or deleted from the SmartMedia.

•Compatible Media (☞ P.128).

•Back up your data at regular intervals. Fuji Photo Film Co., Ltd. accepts no liability for any losses incurred as a result of data being erased or corrupted.

☞Note

Notes on Taking Pictures

You can release the shutter of the FinePix S1 Pro when there is no media installed in the camera. In this event, the image appears on the color LCD monitor but is not recorded. Always check that there is a media card installed in the camera before taking pictures.

24

Image 24

FujiFilm FinePix S1 owner manual Loading Media, Switch the camera OFF, open the slot cover, Close the slot cover

Contents

Basic Photography Setup Advanced Photography Preference For customers in the U.S.A FCC Statement For customers in Canada EC Declaration of Conformity Contents Setting the Image Size Number of Pixels Specifying a Custom WB SettingFocus Lock Photography Shooting Using Exposure Modes Shooting Using 5-Vari Programs Contents Reference Preface Preparatory Trial Shots Camera Features and Accessories FeaturesAccessories Camera Body Cap Nomenclature AE lock button P.70 Command dial Nomenclature Rear Display Panel Screens Display during photography Top Display Panel Liquid crystal in the display panels and viewfinder display Viewfinder Display Attaching the Shoulder Strap Pass the end of the shoulder strap through the strapMount on the camera body Pass the end of the strap through the fastener a On the lithium battery compartment cover Loading the Camera BatteriesLoading the Lithium Batteries Loading the Camera Batteries Loading the AA Batteries Insert the battery adapter as shown in the figure Firmly close the battery compartment coverPower socket 5V socket on the camera and plug the AC-5VH into Switch the camera off and mount the camera lens Mounting the Camera LensAperture ring When the camera is stored with the lens detached To detach the lens from the camera body Switching the Camera On and Off To switch the camera on or off, set the power switch toOn or OFF respectively. When you switch Camera on, the battery check icon I appears Setting the Date and Time Press the MENU/EXE button. The SET-UP menuAppears on the color LCD monitor Switch the camera OFF, open the slot cover Loading MediaInsert the media. Load a Microdrive or a CompactFlash Close the slot cover Switch the camera OFF and open the slot cover Removing MediaEject the media Symbol Name Features and Typical Uses Exposure Modes on the FinePix S1 Pro Setting the Exposure Mode Dial Set the focus mode selector switch to AF autoFocus Holding the Camera and Focusing Hold the camera correctlyCamera shake and shutter speed Compose your shot and press the shutter button Halfway to set the focus Check that the focus indicator is lit and then gently Releasing the ShutterPress the shutter button halfway and check Press the shutter button fully Playing Back Photographed Images Playing Back Photographed Images Multi-frame Playback Press the Play button to display the recorded imageOn the color LCD monitor Press the MENU/EXE button to display the menu Press a or b on the 4-direction button to select Multi or 9-MULTIPress the MENU/EXE button to begin multi-frame When you press function button 2, the image is Erasing Single Recorded ImagesDisplayed on the rear display panel for erase Confirmation Input socket on the TV and switch on the camera Plug the pin-plug end of the video cable into the videoTV. You can then take pictures and play back Images in the usual way Background a Brief Guide Focusing and Exposure Focus and Depth of Field Setup Functions Setting Display Factory Description Default Preview OFF Rear Display Panel Setting the White Balance Press the Func buttonRear display panel. Press function button Display Name Description Light source for the shot is the sun Rear Display Panel Setting the Sensitivity Icon for the ISO sensitivity setting appears on Rear Display Panel Setting the Image Quality Icon for the quality setting appears on Setting appears on the rear display panel. Press Function button Icon for the color setting appears on the rear Press the Func button twiceDisplay panel. Press function button Icon for the tone setting appears on the rear Hard Rear Display Panel Setting the Sharpness Icon for the sharpness setting appears on Rear Display Panel Setting Multi-exposure Icon for the multi-exposure setting appearsOn the rear display panel. Press function button Button to select the Preview setting When you have selected the setting, select ENDPreview and then use d or c on the 4-direction Press the MENU/EXE button SET-UP Menu Part 1 Specifying a Custom WB Setting White paper, that occupies an area larger than Hi Mode Mode and then press d or c on the 4-directionButton to select the Hi Mode setting Press a or b on the 4-direction button to select Hi SET-UP Menu Part 1 Self TIMER/AUTO Power OFF Frame No. and then press d or c on Direction button to select the frame number memoryUsed PC Mode and then press d or c on Direction button to select the PC Mode settingButton to select the beep setting Beep and then press d or c on the 4-direction Language Reset /Camera Reset Camera ResetHold down the exposure compensation button h Aperture button g for 2 or more seconds Focusing Modes When the Focusing Mode is Set to AF auto focusAuxiliary AF Light Focusing Modes When M manual focus is SelectedContinuous use of the auxiliary AF light Nikon flash units and active auxiliary flash Focus Lock Photography Shooting Using Exposure Modes Set the exposure mode dial to zCheck that the focus indicator is lit and take Auto Programmed Auto Program Shift Shooting Using Exposure Modes Speed on the command dial 1/2000 to 30 secShutter-priority Auto Setting narrowest aperture to widest aperture on Aperture-priority Auto Set the shutter speed and aperture setting while Manual Exposure Indicator Shooting Using 5-Vari Programs Points to note when using 5-vari programsVari Programs Vari Program Types and Features Portrait mode Shooting Using 5-Vari Programs Sport mode continuous shooting Center-weighted Metering Metering ModesMulti-pattern Metering and 3D 6-zone Multi-pattern Metering AE Lock Photography Position your subject in the center of the image, holdShutter button halfway and press the AE-L AE Set the amount of compensation on the command dial Exposure CompensationCompose the picture, focus and shoot 320 400 Self-timer Photography Press the self-timer button !. The ! icon appearsOn the top display panel Compose the shot, focus and then press the shutter Diopter Adjustment Function/Eyepiece Cap Points to watch when sliding the diopter adjustment knob Flash Photography Built-in Flash and TTL-BL Flash ControlFlash Control Range Effective Flash range Synchro Mode Types and Features Red-eye reduction mode Set the exposure mode and check the shutter speed Aperture settingExposure Mode Valid Shutter Speeds Valid Apertures Ref. Flash Photography Check that the Ready icon j is displayed Stay within the flash control range P.74Flash Intensity Lenses that Can Be Used with the Built-in Flash Nikon Flash Units that Can Be Used Selected Sensitivity ISO 320 400 Combining Modes Preview Setup Shooting and Recording PreviewsTake a picture in the normal way Press function button 1 or press the MENU/EXE Standard Chart Display Histogram Display Display the preview image P.49Press function button 3 to select the histogram you Want to view Multi-exposure Setup Multi-exposureTo record the overlaid images, press function button Or press the MENU/EXE button Playback Functions Function DescriptionPage Erase ALL or Format procedure ends Press the MENU/EXE button and then select YES toExecute Erase ALL or Format Protection Settings Protecting and Unprotecting All Images On the rear display panel, check the media typeContaining the images for which protection is to be set Or removed Protection Settings ALL if you want to protect the images orCheck the confirmation message and then press ALL is selected Dpof Settings Dpof file Dpof Settings Setting or Cancelling Date/Time ImprintingPress the Play button and then the MENU/EXE Button to display the menu Either Date on or Date OFF. The selected setting Specifying Dpof Settings for Single FrameYou want to specify the Dpof settings Press function button Press d or c on the 4-direction button to select Settings screen appears. Press a on the 4-direction Press function button 1 or 3 to specify the numberPrints for the image Press a on the 4-direction button. The trimming Press function button REVIEW/CANCEL Setting Dpof Settings for All the Images SET ALL Which you want to store Dpof information Check the number of stored Dpof prints and then Cancelling Dpof Settings for All Frames Cancel ALL Which you want to cancel the Dpof information Check the number of prints for which Dpof settings Are to be canceled and then press the MENU/EXE100 Auto Play Settings Auto Play Automatic Playback101 Auto Play time setting and then press d or c to set Auto Play Automatic Playback102 Adjusting the Color LCD Monitor Brightness Brightness menu103 Adjusting the Color LCD Monitor Brightness Press d or c on the 4-direction button to adjustPress the MENU/EXE button to confirm the setting Brightness System Expansion Options 105Reference Lenses that Can Be Used with this Camera 106 107 Optional Accessories Guide 108 109 Compatible OS Compatible SmartMedia FD-A1/A1S/A1NFD-A2 Explanation of Terms 110 Using the USB Cable and Software Included Using the USB Cable and Software Included Computer. When you switch on the computer,Plug the small plug on the cable provided into Digital USB socket on the camera and then plug 113 Places to Avoid Cleaning the CCD 114Dust inside the camera and on the surface of the CCD Preventing Soiling of the CCD 115 Cleaning the CCD Hold down both the self-timer button ! and the AEPoints to Note when Cleaning the CCD Use a blower to remove any soiling on the CCD surface Power Supply Notes Batteries that Can Be Used117 Power Supply Notes 118 119 SmartMedia SmartMedia Specifications 120 Problem Cause Solution 121 122 123 Troubleshooting 124 125 Specifications Specifications126 127 Specifications Batteries Uses and Symptoms When Batteries are DepletedUses Symptoms When Depleted Standard Number of Available Shots Recorded Images Safety Notes 129Do not allow water or foreign objects to enter the camera Do not put the camera down on an unstable surface Safety Notes 130 Regularly request internal inspections and cleaning 131Do not leave the camera in unusually hot locations Do not place heavy objects on the camera 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan