FujiFilm FinePix S1 owner manual 120, SmartMedia Specifications

Notes on Media - continued

•Do not carry SmartMedia in locations such as a trouser pocket. This could subject the SmartMedia to excessive force when you sit down, thereby damaging the SmartMedia.

•The SmartMedia may feel warm when it is removed from the camera after being used for an extended period. This is normal and does not indicate a fault.

•SmartMedia cards have a limited life. After a long period of use it will become impossible to record new image data on the card. In this event, purchase a new card.

•Stick the enclosed index label onto the index area on the SmartMedia. Do not use third- party labels on the SmartMedia as this can cause faults when the SmartMedia is inserted or removed.

•Take care that index labels do not overlap into the write-protect area.

•If there is any initial product defect in SmartMedia as a result of manufacturing by FUJIFILM, the same number of replacement cards will be provided free of charge. FUJIFILM accepts no liability for faults attributable to other causes.

■Notes on using Microdrive and CompactFlash

•Do not write on the media label.

•Do not peel off the media label.

•Do not stick another label onto a media.

•When carrying or storing a media, keep it in the protective case provided.

•Do not use media in CF Type II slots that do not have an eject function.

•Take care when handling media that have been used for long periods as they may become hot.

•Do not place media close to strong magnets.

•Keep media dry.

•Do not apply excessive force to the media cover.

■Notes on using media with a personal computer

•If you intend to take photos using a media that has been used on a personal computer, first format the media on your camera.

•When you format a media in the camera and then photograph and record images, a folder is automatically created on the media. Image data is then recorded in this folder.

•Do not change or delete the folder names or file names on the media from your PC as this will make it impossible to use the media in your camera.

•Always use the camera to erase image data on a media.

•To edit image data, copy the image data to the computer’s hard disk and then edit the copied data.

■SmartMedia Specifications

Type

Operating voltage Operating conditions

Dimensions

Image memory card for digital cameras (SmartMedia) 3.3 V

Temperature: 0°C to +40°C (+32°F to +104°F)

Humidity: 80% or less (no condensation)

37 × 45 × 0.76 mm (1.45 × 1.77 × 0.03 in.) (W × H × D)

120