FujiFilm FinePix S1 owner manual 115

5 Press the shutter button. The mirror swings up and the shutter opens and remains open.

6 Hold the camera so that the light shines on the CCD and check the CCD surface.

• If there is soiling on the CCD surface, contact an authorized FUJIFILM dealer to request cleaning or clean the CCD yourself as described on the next page.

• If there is no soiling on the CCD surface, proceed to step 3 in “Cleaning the CCD” on the next page to drop the mirror back down.

Set the exposure mode dial to M.

2

3

4 Hold down both the self-timer button “!” and the AE lock button “AE-L” and switch the camera on.

Remove the camera lens.

Determining Whether Cleaning is Required

1 Connect the AC power adapter (sold separately) and load the battery adapter.

• During cleaning, always use the AC power adapter and battery adapter to ensure that a power failure does not cause the mirror to drop down or the shutter to close and damage the camera.

5

115