FujiFilm FinePix S1 owner manual Setup Functions, Setting Display Factory Description Default

2 Setup

Setup Functions

Settings available from the rear display panel

Setting	Display	Factory	Description	Ref.
		Default		Page
White	AUTO, Sunny,	AUTO	Specify this setting to take pictures	P.40
balance	Shade, Fluorescent 1,		with the white balance fixed to
	Fluorescent 2,		match the ambient light (indoor or
	Fluorescent 3,		outdoor) when the picture is taken.
	Incandescent,
	Custom
Sensitivity	320, 400, 800, 1600	400	Specify this setting when you want	P.42
			to shoot using a fast shutter speed
			(to prevent camera shake) or when
			you want to take bright pictures
			indoors without using the flash.
Quality	Basic, Normal, Fine,	Normal	Use this setting to specify the	P.43
	Hi		image quality.
Image size	3040, 2304, 1440	3040	Use this setting to specify the	P.44
(number of			number of pixels in the image (the
pixels)			image size).
Color	STD, HIGH, ORG,	STD	Use this setting to specify the	P.45
	B/W		density of the colors in the image.
Tone	STD, HARD, ORG	STD	Use this setting to specify the	P.46
			image contrast.
Sharpness	STD, HARD, OFF	STD	Use this setting to specify the	P.47
			image sharpness.
Multi-	OFF, ON	OFF	Use this setting to specify whether	P.48
exposure			multi-exposure photography is
			performed.

•If you switch the camera off when the data and time have not been set (☞P.22), the settings specified from the rear display panel and from the “SET-UP” menu on the color LCD monitor revert to the factory default settings.

38