FujiFilm FinePix S1 owner manual Icon for the tone setting appears on the rear, Hard

Rear Display Panel Setting the Tone

■Use the procedure below to set the contrast when images are shot.

1	Press the “FUNC” button twice.
2	The	icon for the tone setting appears on the rear
	display panel. Press function button [2].

With the tone set to “STD”

•The display changes in the cycle shown below each time function button

[2]is pressed.

STD

HARD

ORG

•The same settings can also be selected by holding down function button

[2]and pressing “a” on the 4-direction button. You can select settings in the reverse order by holding down function button [2] and pressing “b” on the 4-direction button.

Display	Name	Description
	STD	This setting sets the contrast for photographed images to the
	(default)	standard level.
	HARD	Use this setting for images that will undergo image processing
		for use in commercial printing. This setting provides a higher
		level of contrast than the “STD” setting.
	ORG	This setting specifies a lower contrast than the “STD” setting.
		Use this setting for images that will undergo image processing
		for use in commercial printing.

• If you want to view or print the image data directly, do not select “ORG”.

46