FujiFilm FinePix S1 owner manual Rear Display Panel Setting the Sharpness

Rear Display Panel Setting the Sharpness

■Use this setting to soften or sharpen the outlines in an image and to adjust the quality of the photographed image.

1	Press the “FUNC” button twice.
2	The	icon for the sharpness setting appears on the
	rear display panel. Press function button [3].

With the sharpness set to “STD”

•The display changes in the cycle shown below each time function button

[3]is pressed.

STD

HARD

OFF

•The same settings can also be selected by holding down function button

[3]and pressing “a” on the 4-direction button. You can select settings in the reverse order by holding down function button [3] and pressing “b” on the 4-direction button.

Display	Name	Description
	STD	This setting applies the optimum level of sharpness for normal
	(default)	shots.
	HARD	This setting sharpens the outlines in an image and is best for
		images of subjects such as buildings or text where clarity is	2
		important.
	OFF	Sharpness processing is not applied in this setting. Use this
		setting for images that will undergo image processing for use in
		commercial printing.

• If you want to view or print the image data directly, do not select “OFF”.

47