This guide relates to the following GPS CHART PLOTTERS:
CP180, CP180i, CP300, CP300i, CPV350, CP500 and CPV550.
For older GPS Chart Plotters, the manual is available for download at www.standardhorizon.com or by contacting Marine Product Support at
FCC Compliance Statement
This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions may cause harmful interference with radio communications.
There is no guarantee that interference will not occur in a particular instance. If this equipment does cause harmful interference to other equipment, try to correct the problem by relocating the equipment.
Consult an authorized STANDARD HORIZION dealer or other qualified service technician if the problem cannot be corrected. Operation is subject to the following conditions: (1) This device cannot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION
-The FF520 is designed for maritime use.
-The FF520 contains dangerous high voltage circuits which only experienced technicians can handle.
-STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material.
WARNING
-When plugging in or unplugging a transducer to the FF520 make sure power is turned off.
Copyright 2007. STANDARD HORIZON All rights reserved. Printed in Italy.
No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without prior written permission of the publisher.
Page 4 | FF520 |
CODE: Issue I - 151007e |
|
|
|