Suunto HELO2 manual Dive logbook MEMLogbook

Page 37

The dive time and date are registered in the Logbook memory. Always check before diving that the time and date are correctly set, especially after traveling between different time zones.

7.6.1. Dive logbook (MEMLogbook)

The Suunto HelO2 has a very sophisticated, high capacity Logbook and Profile Memory. The data is recorded in the profile memory based on the selected sample rate.

The END OF LOGS text is displayed between the oldest and most recent dive. The following information will be shown on three pages:

THERE ARE THREE PAGES OF LOGBOOK DIVE

INFORMATION. USE SELECT BUTTON TO SCROLL

BETWEEN LOGBOOK PAGES I, II, AND III. THE DATA OF

THE MOST RECENT DIVE IS SHOWN FIRST.

Page I, main display

•maximum depth

•date of dive

•type of dive (MIXED GAS, GAUGE)

•dive start time

•dive number

•oxygen percentage for Mix used in the beginning of the dive

•helium percentage for Mix used in the beginning of the dive

•dive time

Page II

•maximum depth

•surface time after previous dive

•average depth

•warnings

•consumed tank pressure

37

Image 37

Contents HelO2 Page Welcome to the World of Suunto Diving Instruments Care and Maintenance of MY Suunto Diving Computer Welcome to the World of Suunto Diving Instruments Using HelO2 with Dive Manager and Dive PlannerOr death Or professional diving activitiesPhysician regarding your fitness before diving Stop, and Rgbm adjustments are correct ASC Time symbol and the upward pointing arrowUSE BACK-UP INSTRUMENTS! Make sure that you use back-up Diving with the dive computerBefore the instrument has counted down the no-fly time Batteries. Recycle or dispose of used batteries properlySymbol Button Press Main functions Button symbols and functionsSuunto HELO2 AT a Glance Navigating in the menusDown Long Enter Setting mode Setting the time Time mode settingsSetting the date Setting the unitsSetting the tones Setting the backlightAC water contacts Planning your dives Before DivingSuunto Technical Rgbm Dive computer limitations Emergency ascentsMixed gas diving Alarm indication Alarm reason Audible and visual alarmsError conditions Alarm indicationOut of calculation limits Gas mixInstalling the wireless transmitter Wireless transmissionPairing and code selection Omitted decompressionDisplay Indication Transmitting dataSetting the gases Mixed GAS Dive mode settingsDive Setting the dive-time alarm Setting the depth alarmSetting the personal/altitude adjustments Before you have ascended above this depthSetting the tank pressure alarm Setting the sample rateSetting the tank pressure Setting the HP codeDive mode activation Accessing Dive modeActivation and pre-checks Alt. adjustment value Altitude range Battery power indicationDiving at altitude Personal adjust- Condition Desired tables Ment value Personal adjustmentsHow the Altitude value is set Before divingRecommended Safety Stops Safety StopsMandatory Safety Stops Other personal injury, and deathDeep stops Diving-related information DivingBasic dive data Bookmark Ascent rate indicatorDecompression dives Than at the ceiling Ceiling, ceiling zone, floor and decompression rangeDisplay below the floor Accident, you should stay somewhat below the ceilingDisplay above the floor Display at the ceiling zoneBefore diving in Mixed GAS mode Diving in Mixed GAS modeDefault gas mix settings Oxygen and helium displaysGas change and multiple breathing gas mixes Oxygen limit fraction OLFDiving in Gauge mode After Diving Alarms Symbol on displaySurface interval Dive numberingDive Planning mode PLANnodec Plan modeRepetitive dive planning Flying after divingMemory mode PLANNoDec modeMixed GAS mode, it does not affect the calculations Dive numbering shown during dive planningDive logbook MEMLogbook Suunto Dive Planner SDP Dive historySuunto Dive Manager SDM Dive Planner. It ensures that you have a valid decompressionPage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving ComputerBattery replacement and strap kits must be used FAQsWarranty Battery kit Battery ReplacementReplacing the battery Required toolsWireless transmitter battery replacement Battery compartment lid, indicating a leakMade in a proper manner to avoid any leakage of water into TransmitterStalling the transmitter battery Transmitter battery kitPage Technical Data Rgbm BatterySuunto Technical Rgbm decompression model Diver safety and Suunto Technical Rgbm modelAfter dive planning Oxygen exposure Altitude divingCopyright Trademark Intellectual PropertyPatent notice User’s responsibility Disclaimers12.2. CE Exclusions and Limitations Warranty PeriodOther important notices Access to Suunto warranty serviceLimitation of Liability Page Disposal of the Device EAD EAN GlossaryNo DEC Time Copyright Customer Service ContactsPage TWO Year Warranty Page Page Suunto Oy 4/2009