Suunto HELO2 manual FAQs, Battery replacement and strap kits must be used, Warranty

Page 42

The water resistance of the unit must be checked after replacing the battery or after other service operations. The check requires special equipment and training. You must frequently check the display for any sign of leaks. If you find moisture inside your dive computer, there is a leak. A leak must be corrected without delay as moisture will ser- iously damage the unit, even beyond repair. SUUNTO does not take any responsibility for damage caused by moisture in the dive computer unless the instructions of this manual are carefully followed. In the event of a leak, immediately take the dive computer to an authorized SUUNTO dealer or distributor.

FAQs

WHAT CAN I DO TO MY SUUNTO DIVING COMPUTER MYSELF?

NOTE

It is advisable to contact an authorized Suunto service, distributor or

 

retailer for any repairs. Batteries and straps can be replaced by the

 

user when the change is made in a proper manner to avoid any

 

leakage of water into the battery compartment or computer. Original

 

battery replacement and strap kits must be used.

Batteries can be changed by the user in all diving computers except Stinger, D4, D6 and D9.

Instructions for changing batteries and straps can be found in the user manuals or at www.suunto.com and the user videos there.

WHAT ARE ORIGINAL SUUNTO ACCESSORIES?

Original Suunto accessories are only distributed through Suunto`s worldwide network of authorized Suunto distributors and retailers.

Original Suunto accessories are tested to be compatible with Suunto products and can be used safely.

NOTE

Damage caused by non-original accessories will not be covered by

 

warranty.

HOW TO GET MORE INFORMATION

You can find service & warranty information in these pages by searching the FAQs.

If you do not find the answer in the FAQs, you can also send a support request. To be able to send a support request you have to register in the system. REGISTER NOW. You can also contact our European help desk by telephone at +358 2 284 1160. The cost of the call is that of a normal call to Finland. The call center is open Mon-Fri, 24h/day. The service is provided in English all the time. Other languages - French, German, Swedish, Japanese, Spanish and Finnish – are only provided during local business hours. Call center professionals can answer customer questions regarding diving products, outdoor products and compasses.

HOW DO I KNOW IF MY SUUNTO PRODUCT IS COVERED BY WARRANTY?

You can check the proof pf purchase, which has to be 2 years or less. You can also check the serial number of your unit.

Does repairing my Suunto product extend the warranty?

As far as the national laws permit, repairing the product does not extend or otherwise affect the warranty period. However, part(s) repaired or replacement product(s) provided during the warranty period will be warranted for the remainder of the original warranty period or for three (3) months from the date of repair or replacement, whichever is longer.

42

Image 42
Contents HelO2 Page Welcome to the World of Suunto Diving Instruments Care and Maintenance of MY Suunto Diving Computer Using HelO2 with Dive Manager and Dive Planner Welcome to the World of Suunto Diving InstrumentsOr professional diving activities Or deathPhysician regarding your fitness before diving USE BACK-UP INSTRUMENTS! Make sure that you use back-up ASC Time symbol and the upward pointing arrowStop, and Rgbm adjustments are correct Diving with the dive computerBatteries. Recycle or dispose of used batteries properly Before the instrument has counted down the no-fly timeSuunto HELO2 AT a Glance Button symbols and functionsSymbol Button Press Main functions Navigating in the menusDown Long Enter Setting mode Setting the date Time mode settingsSetting the time Setting the unitsSetting the backlight Setting the tonesAC water contacts Before Diving Planning your divesSuunto Technical Rgbm Emergency ascents Dive computer limitationsMixed gas diving Audible and visual alarms Alarm indication Alarm reasonOut of calculation limits Alarm indicationError conditions Gas mixPairing and code selection Wireless transmissionInstalling the wireless transmitter Omitted decompressionTransmitting data Display IndicationMixed GAS Dive mode settings Setting the gasesDive Setting the personal/altitude adjustments Setting the depth alarmSetting the dive-time alarm Before you have ascended above this depthSetting the tank pressure Setting the sample rateSetting the tank pressure alarm Setting the HP codeAccessing Dive mode Dive mode activationActivation and pre-checks Battery power indication Alt. adjustment value Altitude rangeDiving at altitude How the Altitude value is set Personal adjustmentsPersonal adjust- Condition Desired tables Ment value Before divingMandatory Safety Stops Safety StopsRecommended Safety Stops Other personal injury, and deathDeep stops Diving Diving-related informationBasic dive data Ascent rate indicator BookmarkDecompression dives Ceiling, ceiling zone, floor and decompression range Than at the ceilingDisplay above the floor Accident, you should stay somewhat below the ceilingDisplay below the floor Display at the ceiling zoneDefault gas mix settings Diving in Mixed GAS modeBefore diving in Mixed GAS mode Oxygen and helium displaysOxygen limit fraction OLF Gas change and multiple breathing gas mixesDiving in Gauge mode Surface interval Alarms Symbol on displayAfter Diving Dive numberingRepetitive dive planning Plan modeDive Planning mode PLANnodec Flying after divingMixed GAS mode, it does not affect the calculations PLANNoDec modeMemory mode Dive numbering shown during dive planningDive logbook MEMLogbook Dive history Suunto Dive Planner SDPDive Planner. It ensures that you have a valid decompression Suunto Dive Manager SDMPage Care and Maintenance of MY Suunto Diving Computer Water Contacts and Push ButtonsFAQs Battery replacement and strap kits must be usedWarranty Replacing the battery Battery ReplacementBattery kit Required toolsMade in a proper manner to avoid any leakage of water into Battery compartment lid, indicating a leakWireless transmitter battery replacement TransmitterTransmitter battery kit Stalling the transmitter batteryPage Technical Data Battery RgbmDiver safety and Suunto Technical Rgbm model Suunto Technical Rgbm decompression modelAfter dive planning Altitude diving Oxygen exposureIntellectual Property Copyright TrademarkPatent notice Disclaimers User’s responsibility12.2. CE Warranty Period Exclusions and LimitationsAccess to Suunto warranty service Other important noticesLimitation of Liability Page Disposal of the Device Glossary EAD EANNo DEC Time Customer Service Contacts CopyrightPage TWO Year Warranty Page Page Suunto Oy 4/2009