View the recorded data
The notes you record on the sequencer are recorded as MIDI messages. Let’s use the Microscope display (SEQ/Micro) to check the drum performance data you recorded just now.
<Procedure>
❶While holding down [SHIFT], press [BWD] to move right to the beginning of the first measure of the song.
❷Press [F4] (Micro).
The Microscope display (SEQ/Micro) will appear.
Song position
Performance data
❸Press [ 
] to view the recorded performance data.
Pressing [ 
] will move the “>” symbol to the next data. Pressing [ 
] will move the “>” sym- bol to the previous data.
✳A “*” symbol displayed at the left of performance data indicates that other data has also been recorded at the same Song position.
Record the bass using step recording
The Step Recording function allows you to input notes and rests one by one. It is suitable for recording a bass line that should be rhythmically correct, or other Parts you may have difficul- ties playing by hand. Use
✳
<Procedure>
❶Press [PERFORM].
❷Press [ 
] or [ 
] until “Part
The part played by the keyboard
❸Press [SEQUENCER], then [F4] (Micro) to call up the Microscope display (SEQ/Micro).
❹ Hold down [SHIFT] and press [BWD] to return to measure 1.
❺ Select Phrase track 2 as the recording destination by pressing TRACK/PART [2].
25