Rack Mounting Instructions, Remove both side panels

Rack Mounting Instructions

The D-5.5 and D-5.5E are designed for either console or rack-mount use, using a pair of brackets (included). The following procedure should be observed for the rack-mount use.

1. Remove both side panels

and armrest

unscrewing

and removing 6 screws.

2.Mount the brackets on both sides of the chassis, using the screws removed from the side panels.

3. The rear panel		and blank
panel	should	be inter-

changed to allow for easy connection when the D-5.5and D - 5 . 5 E are rack mounted.

a.Remove the rear panel corner frame and blank panel

b.Put the rear panel in the original position of the blank panel.

c.Put the corner frame back in place.

d.Put the blank panel in the original position of the rear panel.

WARNING

The D-5.5 and D-5.5E contain voltage levels that may be hazardous to human life. Always disconnect the power cord from wall outlet prior to removing either unit's outer case.

— 18 —