Output Channel

Front Panel (D-5.5)

Level Control for Return to Group (RET TO GROUP,

LEVEL)

This control adjusts the level of signal from the AUX 1 return and AUX 2 return, or the EFF return and

REV return.

Cross-fate Control to Group (RET TO GROUP,

X-FADE)

With the return signal select switch set to the

REV/EFF position, the EFF and REV return signal

levels are equally assigned to the group buss. When the control is in its center, detent position. Rotating the control counter-clockwise decreases the signal

level of the EFF return, keeping the original level of the REV return signal, while rotating the control

clockwise decreases the signal level of the REV

return, keeping the original level of the EFF return signal.

With the return signal select switch set to the aux 1/aux 2 position, the aux 1 and aux 2 return signal

levels are equally assigned to the group buss when

the control is in its center, detent position. Rotating the control counter-clockwise decreases the signal level of the aux 2 return signal, keeping the original level of the aux 1 return signal, while rotating the control clockwise decreases the signal level of the aux 1 return, keeping the original level of the aux 2

return signal.

Return Signal Select Switch (REV/EFF, AUX 1 /

AUX 2)

This switch selects either the REV/EFF return signals or the AUX 1 / AUX 2 return signals to feed them to the group buss.

Pan Pot (PAN)

The pan pot control assigns the fader output signal of each group channel to the stereo L and R mixing busses. At the detented center position, the pan pot routes the signal equally to the L and R mixing busses. Panning from one side to the other gradually assigns the input signal to either the stereo L or R mixing busses exclusively.

Signal/Peak LED Indicator (SIG/PEAK)

The LED indicator lights in green colour when the group output signal reaches more than -30dB, and turns to red when the groups signal reaches -3dB below clipping, giving a visual reference for adjust- ment of the group fader. (See NOTE 1)

Group Channel ON indicator (CHANNEL ON)

The LED indicator lights orange when the group

channel ON/OFF switch is "on".

Group Channel ON/OFF Switch (CHANNEL)

This pushbutton connects or disconnects the signal to the group output and stereo L/R busses.

NOTE 1:

Levels should be adjusted so that the LED only flashes red intermittently. A steady red light indicates that the channel is being over driven and the level should be reduced.

— 7 —