■Using the MD Player (Listening to an MD)
Number Keys | DISPLAY |
|
|
| MD 6 |
| |
|
|
| |
PROGRAM | RANDOM |
|
|
0 MD | REPEAT |
|
|
MD 6 |
|
| |
4 | ¢ | 4 | ¢ |
| 7 | ||
| 7 |
DISPLAY/CHARA.
JOG dial
0MD
Track number, Playing time,
Play mode indicator Preset number Repeat indicator
When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
You can use Normal, Random, Program or Repeat Play in the same way as for CD Player. Repeat Play can repeat all the tracks or just one of the tracks on the MD.
Here are the basic things you need to know to play an MD and locate the different tracks on it.
The Quickest Way To Start an MD Is With the One Touch Operation
■Press the MD6 button.
•The power is automatically turned on. If an MD is already inserted, it will start playing from the first track.
•If no MD is inserted, "MD NO DISC" appears on the display and the MD Player remains in Stop mode.
MD indicator | Music calender OVER indicator which lights |
| up if the number of tracks of |
| the MD exceeds 20. |
Track number | Playing time |
•The tracks in the MD appear on the music calender.
•The track number that has been played disappears from the music calender.
•The MD Player automatically stops when the last track of the MD has finished playing.
■If the track has the title, the track title will be displayed before playing the track.
You can give the disc title and the track title as required. (See page 18.)
To Insert an MD
■Insert an MD into the MD slot.
Insert it with its label side up and the # or ] mark of the MD directs as shown in the figure.
The MD is automatically drawn inside the MD Player. When the function is set to MD, the display automatically changes as follows.
Loading=TOC Reading=Disc title, if it is given=Total track number and total playback time (e.g.: MD 28 55:45)
•The music calender also appears on the display.
MD slot
MD
■You can insert an MD while listening to the other source.
Basics of Using the
MD Player - Normal Play
To Play an MD ———————————
■1. Insert an MD.
■2. Press the MD 6 button.
The first track of the MD begins playing.
To stop playing the MD, press the 7 button. The following in- formation for the MD is displayed after the disc title appears for 2 seconds if it is given.
Total track number Total playback time
To stop playing and remove the MD, press the 0MD button
to eject the MD.
To pause, press the MD6 button. The playback time blinks on the display.
To cancel pause, press the same button again. Play continues from the point where it was paused.
Displaying the Disc/Track Title ———
You can display the disc title of the MD in Stop mode and the track title during playback.
Displaying the Disc Title:
In Stop mode, press the DISPLAY/CHARA. button on the Unit or the DISPLAY button on the Remote Control.
Each time you press the button, the display changes as follows.
Total track number and total playback time=Disc title=Remaining time (recordable capacity) of MD (e.g. REM. 23:00)=Clock=(back to the beginning)
During playing back, press the DISPLAY/CHARA. button on the Unit or the DISPLAY button on the Remote Control.
Each time you press the button, the display changes as follows.
Track number and playback time for the track being played =Track title=Remaining time (recordable capacity) of MD (e.g. REM. 23:00)=Clock=(back to the beginning)
11