RD-MD5(B)-e.fm Page 6 Wednesday, December 2, 1998 11:40 AM
ACS (Active Clear Sound) Effect
The Active Clear Sound circuitry emphasizes the high frequency range level in conjunction with the bass level so that you can obtain clear sound at high frequencies. You can use this effect only for playback.
To get the effect, press the ACTIVE CLEAR SOUND button on the Unit or the ACS button on the Remote Control.
The "ACS" indicator lights up and "ACS ON" appears on the dis- play for 3 seconds.
The "ACTIVE CLEAR SOUND LEVEL" indicator on the Unit will light when the Active Clear Sound effect is activated because of great bass level.
To cancel the effect, press the same button again.
The "ACS" indicator goes out and "ACS OFF" appears on the dis- play for 3 seconds.
ACS indicator
or
Note: This function is not effective when playing in monaural.
Showing the Time (CLOCK)
While the power is turned on, you can see the current time (clock) at any time.
Press the DISPLAY/CHARA. button on the Unit or the DISPLAY button on the Remote Control. Each time the button is pressed, the display changes as follows.
Current sound source (e.g. FM103.50MHz)=Remaining time of the MD (if an MD is inserted)=Clock=(back to the beginning)
Note: To let work the clock, you need to set the clock beforehand. (See "Setting the Clock" on page 21.)
6