Kawai CN22 manual Function Mode, Basic Operation

Page

25

5. FUNCTION MODE

The Function Mode settings allow various advanced parameters of the CN22 digital piano to be adjusted.

1) BASIC OPERATION

…Step 1

Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press one of the 10 keys assigned to the desired function.

The LED indicators for the METRONOME and SOUND SELECT buttons will start to flash while the settings are being

adjusted.

„If the LED indicators for either the CONCERT MAGIC or LESSON buttons are turned on, the Function Mode cannot be used.

…Step 2

While still holding down the METRONOME and SOUND SELECT buttons, press the ‘- (off)’ or ‘+ (on)’ keys to change the value for the selected function.

	- +	1	2	3	4	5	6	7	8	9	0
	off on
Hold down the both buttons
					number keys						1	2	3	4	5	6	7	8	9	10
„While holding down the METRONOME	Use the enclosed ‘function label’										TOUCH	TRANSPOSE	TUNING	REVERB	DAMPER EFFECT	CONCERT MAGIC MODE	MIDI CHANNEL SELECT	MIDI LOCAL CONTROL	MULTI TIMBRAL MODE ON/OFF	TRANSMIT MIDI PROGRAM CHANGE
and SOUND SELECT buttons, it is
	(page 8) for your convenience.
possible to select other functions,
changing each value successively.
Step 3																					5
																					FUNCTIONMODE
Release both the METRONOME and SOUND SELECT buttons to exit Function Mode.

„When the power is turned off, Function Mode settings will be reset to the factory default values, shown below.

MIDI settings

Function	Default
TOUCH	Normal
TRANSPOSE	0
TUNING	A4=440.0Hz
REVERB	On
DAMPER EFFECT	2 (Normal)
CONCERT MAGIC MODE	Mode 1
MIDI CHANNEL SELECT	1ch
MIDI LOCAL CONTROL ON/OFF	On
MULTI TIMBRAL MODE ON/OFF	Off
TRANSMIT MIDI PROGRAM CHANGE	On