Page
26
2) TOUCH TYPE
When playing a piano, the volume of the sound produced increases in direct relation to how hard each key is struck. The TOUCH function allows different touch sensitivities for the keyboard to be selected, other than the standard touch of an acoustic piano. The sensitivity can be changed to one of four different settings: Light, Normal, Heavy or Constant.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press the key assigned to the TOUCH function.
|
|
|
|
|
| number keys |
|
|
|
Step 2 |
|
|
|
|
|
|
|
|
|
While still holding down the METRONOME and SOUND SELECT |
|
|
|
|
|
|
|
|
|
buttons, press one of the following keys: |
|
|
|
|
|
|
|
|
|
¡ Key1: LIGHT | - | + | 1 | 2 | 3 | 4 5 6 7 | 8 | 9 | 0 |
off on | |||||||||
For those still developing finger strength, such as a child, a louder |
|
|
|
|
|
|
|
|
|
sound is produced even when the piano is played with a soft | Key1: LIGHT |
|
|
|
|
|
|
|
|
Key2: NORMAL |
|
|
|
|
|
|
|
| |
touch. |
|
|
|
|
|
|
|
| |
Key3: HEAVY |
|
|
|
|
|
|
|
| |
| Key4: CONSTANT |
|
|
|
|
|
|
|
|
¡Key2: NORMAL
The standard setting, reproducing the touch sensitivity of an acoustic piano. This touch type is selected automatically when the CN22 digital piano is turned on.
¡Key3: HEAVY
Perfect for those with strong fingers or for practicing with a hard touch.
¡Key4: CONSTANT
This setting is suitable for sounds that have a fixed dynamic range, such as Organ and Harpsichord. A constant volume is produced regardless of how hard the keys are struck.
The touch type is automatically set to NORMAL when the CN22 digital piano is turned on.
| MODE |
5 | FUNCTION |
|
3) TRANSPOSE
The TRANSPOSE function allows the piano’s keys to be raised or lowered in half steps. This is particularly useful when accompanying instruments with different tones, or when a song learned in one key must be played in another key. The transpose feature allows the song to be played in the original key, but heard in another key.
Step 1
Press and hold the METRONOME and SOUND SELECT buttons simultaneously, then press the key assigned to the TRANSPOSE function.
+1 +3 C# D#
Step 2
While still holding down the METRONOME and SOUND |
|
|
|
|
|
|
|
|
|
|
| |
SELECT buttons, press a key on the keyboard to select the |
|
|
|
|
|
|
|
|
|
|
| |
desired transposed key. |
|
|
|
|
|
|
|
|
|
|
| |
- | + | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | |
off on | ||||||||||||
|
|
|
|
|
|
|
|
|
| |||
The CN22 digital piano can be transposed up to 5 half steps |
|
|
|
|
|
|
|
|
|
|
| |
higher (F) or 6 half steps lower (F#). |
| 0 | +2 +4 +5 |
|
|
| ||||||
Off On |
|
|
| |||||||||
The transpose value is set to 0 (C) when the CN22 digital piano |
| C | D | E | F | G | A | B |
|
|
| |
is turned on. |
|
|
|
|
|
|
|
|
|
|
| |
The transpose function can be turned off/on, retaining the set value, by using the ‘- (off)’ or ‘+ (on)’ keys.