Page
46
6 FUNCTIONS MENU
When set to ON, the sustain pedal is active for the lower sound when the pedal is depressed.
When set to OFF, the sustain pedal will not be active for the lower sound when the pedal is depressed, however the sustain pedal will still be active for the upper sound.
Step 3
Press any one of the SOUND SELECT buttons to exit the menu.
The Lower Pedal ON/OFF function will return to the default setting of ‘OFF’ each time the power is turned off.
Use the User Memory function (page 60), to save the desired Lower Pedal ON/OFF setting, allowing the current Lower Pedal ON/OFF setting to remain even after the power is turned off.
4) LAYER OCTAVE SHIFT
This function allows the octave of a layered sound (the sound displayed in the second line of the LCD display) to be raised or lowered by one octave when using DUAL mode.
For example, when playing in dual mode using Concert Grand Piano and String Ensemble sounds, the octave range for the String Ensemble sound can be raised or lowered.
1 | 2 |
|
Step 1
Press the MENU buttons to select the Layer Octave Shift function.
4LayerOctShift
=0
The Layer Octave Shift value will be shown on the second line of the LCD display.
Step 2
Press the VALUE buttons to set the desired Layer Octave Shift value.
The value can be set within the range of
Minus values select an octave range one or two octaves lower. Positive values select an octave range one or two octaves higher.
The octave for the sound displayed in the second line of the LCD display when using DUAL mode will be changed.
For some sounds it may not be possible to select a higher octave range.
Step 3
Press any one of the SOUND SELECT buttons to exit the menu.
The Layer Octave Shift function will return to the default setting of ‘OFF’ each time the power is turned off.
Use the User Memory function (page 60), to save the desired Layer Octave Shift setting, allowing the current Layer Octave Shfi t setting to remain even after the power is turned off.