Page
62
7. APPENDICES
CONNECTING TO OTHER DEVICES
Caution y Do not directly connect the LINE IN and LINE OUT jacks of the CN41 together with a cable. An audio loop (oscillation sound) will occur, resulting in damage to the unit.
1 | 2 | 3 | 4 | 5 | 6 |
7 | APPENDICES |
|
Computer and exchange |
|
| Amplifiers, Speakers, or similar | |
MIDI data. | USB device | Pedal cable | ||
equipment | ||||
External MIDI devices | (USB memory or |
| Audio equipment or | |
| USB floppy disk |
| ||
|
| electronic instruments | ||
| drive) |
| ||
|
|
|
1MIDI JACKS
These jacks are used to connect external MIDI devices with the CN41 piano. There are three terminals: MIDI IN, MIDI OUT and MIDI THRU.
2USB to Host
This jack is used to connect with a personal computer and exchange MIDI data.
3USB to Device
This jack is used to connect with a USB device. (USB memory or USB fl oppy disk drive)
4PEDAL JACK
This jack is used to connect the pedal cord from the pedal board to the CN41 piano.
5LINE OUT JACKS
These jacks provide stereo output of the CN41 piano’s sound to amplifi ers, tape recorders or similar equipment. The audio signal coming through the LINE IN jacks is also routed to these jacks. The CN41 piano’s sound is mixed with the LINE IN signals.
The CN41 piano’s VOLUME slider controls the output level of its own sound without affecting the level of the LINE IN signal.
6LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments to the CN41 piano’s speakers. The audio signal coming through these jacks bypasses the CN41 piano’s volume control. To adjust the volume level, use the output control of the external device.