Pioneer CDJ-100S specifications Panel Facilities, Top Panel

		BEFORE OPERATIONS
PANEL FACILITIES
Top Panel	- MASTER TEMPO button ] P. 11
	Ö	The master tempo function is turned ON/OFF.
	Ö	If the button is held depressed for 2 seconds or
		more, the tempo adjust dial's variable range is
		changed (±10% or +10% to –16%). When the vari-
		able range is changed, the newly selected numeri-
		cal range is displayed for about 2 seconds (10.0 /
		16.0).
	Ö The variable range is set by default to the ±10 set-
		ting whenever power is first turned on.
	= TIME MODE/AUTO CUE button
	Two functions are available.
	[Time display]
	Each time this button is pressed, the time display
	changes between the elapsed playback time of the
	track and the remaining playback time of the track
	(REMAIN).
	Ö The REMAIN display appears when power is turned
		ON.
	[Auto Cue function] ] P. 9
	When a disc is initially loaded or when performing
	track search, this function automatically sets the cue
	point (the point immediately preceding actual sound
	output).
	Ö The Auto Cue function defaults to OFF when power
		is first turned on.

~ TEMPO control knob

1	POWER switch	The playback tempo can be changed with this knob.
	(Located on rear panel)	The center clicked position is for normal playback
		tempo. If you slide the knob (down) towards you (+
	Provides electrical power to the player.
		side), the music tempo quickens. If the knob is away
2	Display window ] P. 8
		from you (– side), the music tempo slows.
3	DIGITAL JOG BREAK buttons	! Jog dial (+ FWD/– REV) ] P. 11
	(JET, ZIP, WAH, HOLD) ] P. 11	@ Disc loading slot ] P. 8
4	TRACK SEARCH buttons (4, ¢) ] P. 9
		Insert discs with label side up.
5	SEARCH buttons (1, Á) ] P. 9, P. 12	Ö When playing 8 cm (3-inch) discs, insert the disc in
6	CUE button/indicator	a commercially available CD adapter before load-
		ing it in the CD player.
	Three functions are available.	# DIGITAL OUT switch ] P. 14
	[Setting a Cue Point] ] P. 10
		(Located on rear panel)

[Back Cue] ] P. 12

[Cue Point Sampler] ] P. 12

[Modify a Cue Point] ] P. 12

7PLAY/PAUSE button/indicator (6) ] P. 9

8Loading indicator

Flashes while disc is being loaded or removed through loading slot, and lights steadily when a disc is loaded in the player.

9Force ejection hole ] P. 4

0EJECT button

When this button is pressed, disc rotation stops and the disc is ejected from the player's loading slot.

7

<DRB1232>

En