4. Specify the split point. While holding down the SPLIT button, press the keyboard where you want the left- most key of the high end range to be.
Example: To specify G3 as the split point, press the G3 key.
5. Now try playing something on the keyboard.
•Every key from F 3 and below is assigned the PIZZICATO tone, while every key from G3 and above is assigned the STRINGS tone.
6.Press the SPLIT button again to unsplit the keyboard and return it to normal.
SPLIT
|
|
|
|
|
|
Split Tone |
|
| Main Tone (STRINGS1) | ||
(PIZZICATO STR) |
|
|
|
| |
|
|
|
|
| |
Split point |
|
Using Layer and Split Together
You can use layer and split together to created a layered split key- board. It makes no difference whether you layer tones first and then split the keyboard, or split the keyboard and then layer tones. When you use layer and split in combination, the high range of the key- board is assigned two tones (main tone + layered tone), and the low range two tones (split tone + layered split tone).
To split the keyboard and then layer tones
1. Press the TONE button and then input the tone num- ber of the main tone.
2. Press the SPLIT button and then input the number of the split tone.
LAYER |
SPLIT |
Indicator appears
•After specifying the split tone, press the SPLIT button to unsplit the keyboard.
3. Press the LAYER button and then input the number of the layered tone.
•Note that you can reverse steps 2 and 3, specifying the lay- ered tone first and then the split tone.
LAYER |
SPLIT |
Indicator appears
4. Press the SPLIT button or the LAYER button so both of the SPLIT and LAYER indicators are displayed.
5. Input the number of the layered split tone.
LAYER |
SPLIT |
6. Specify the split point.
•While holding down the SPLIT button, press the keyboard where you want the leftmost key of the low end range to be.
7.Play something on the keyboard.
•Press the LAYER button to unlayer the keyboard, and the SPLIT button to unsplit it.
LAYER SPLIT
|
|
|
|
|
Split Tone (PIZZICATO STR) |
|
| Main Tone (BRASS) | |
+ |
|
|
| + |
|
|
| ||
Layered Split Tone (STRINGS1) |
|
| Layered Tone (FRENCH HORN) | |
|
|
|
| |
Split point |
|