Assignable Knobs

Type: The type of message that will be sent. The available settings are MIDI CC, Aftertouch (Aft), Increment/Decrement 1 (Inc/Dec1), and Increment/Decrement 2 (Inc/Dec2).

MIDI Channel: This setting determines over which MIDI channel the messages are sent. The available settings are Common, USB A1–A16, and USB B1–B16.

CCNumber: If MIDI CC or Inc/Dec2 is the selected Type, this determines the MIDI CC number. The available range is 000–127.

MIDI to DIN: This determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off). MIDI data will be sent to MPK261's USB connection regardless of this setting.

Min / Max: If MIDI CC or Aft is the selected Type, these determine the lowest (Min) and highest (Max) values. (If Min is higher than Max, the knob's polarity will be reversed.) The available range is 000–127.

MSB / LSB: If Inc/Dec1 is the selected Type, these determine the MSB (Most Significant Bit) and LSB (Least Significant Bit). The available range is 000–127.

Tip: For more information about Program Change and Program Bank messages, please see the Program Change Mode chapter of this guide.

Value: If Inc/Dec1 is the selected Type, this determines the value sent by an Increment (CC #96) or Decrement (CC #97) message. The available range is 000–127.