Akai MPK261 manual Assignable Faders

Assignable Faders

Type: The type of message that will be sent. The available settings are MIDI CC and Aftertouch (Aft).

Important: Aftertouch refers to MIDI information sent when pressure is applied to a key or pad after it has been played and while it is being held down. Aftertouch is often used to control volume, vibrato and other parameters.

MIDI Channel: This setting determines over which MIDI channel the messages are sent. The available settings are Common, USB A1–A16, and USB B1–B16.

CCNumber: If MIDI CC is the selected Type, this determines the MIDI CC number. The available range is 000–127.

MIDI to DIN: This determines whether or not MIDI data is sent to the MIDI Out (On) or not (Off). MIDI data will be sent to MPK261's USB connection regardless of this setting.

Min / Max: These determine the lowest (Min) and highest (Max) values. (If Min is higher than Max, the fader's polarity will be reversed.) The available range is 000–127.

16