VTech sit-to-stand user manual Troubleshooting, Important Note

Page 11

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

1.Please turn the unit OFF.

2.Interrupt the power supply by removing the batteries.

3.Let the unit stand for a few minutes, then replace the batteries.

4.Turn the unit ON. The unit should now be ready to play again.

If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada, and a service representative will be happy to help you.

IMPORTANT NOTE:

Creating and developing Smart Start® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S., or 1-800-267-7377 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you.

Troubleshooting

10

Image 11
Contents Sit-To-Stand Activity Walker Sincerely Your Friends at VTech Introduction IntroductionInstructions & Activities Included in this PackageGetting Started WE do not Recommend the USE of Rechargeable Batteries Assembly InstructionsProduct Storage Automatic SHUT-OFF Product FeaturesON/OFF/VOLUME Control Switch Demo TAB Three Positions of PlayWheel Lock Activities Care & Maintenance Care & MaintenanceImportant Note TroubleshootingTroubleshooting Other Info