Pioneer DJM-500 operating instructions

Page 1

Operating Instructions

DJ MIXER

DJM-500

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly.

After you have finished reading the instructions, put them away in a safe place for future reference.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

CONTENTS

 

CAUTIONS REGARDING HANDLING

4

Location

4

Condensation

4

Cleaning the unit

4

CHECKING ACCESSORIES

4

FEATURES

5

CONNECTIONS

6

1. Connection of Input Equipment

6

2. Connection of Outputs, Microphones, Etc

7

NAME AND FUNCTION OF PARTS

8

Front section

8

Rear section

11

USING THE EFFECT FUNCTION

12

Features of Various Effectors

12

Measuring BPM

14

Operating Delay, Echo, Auto pan, Flanger

15

Operating Pitch Shifter and Reverb

16

Using the External Effecter

16

USING THE FADER START FUNCTION

17

Starting the Cross Fader

17

Starting the Channel fader

17

TROUBLESHOOTING

18

SPECIFICATIONS

19

IMPORTANT NOTICE:

RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE REAR PANEL.

MODEL NO. DJM-500

SERIAL NO.

KEEP THESE NUMBERS FOR FUTURE USE.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents DJM-500 Pour le modèle Canadien For Canadian modelInformation to User We Want You Listening For a Lifetime Cleaning the unit Checking AccessoriesLocation CondensationFeatures Connections Connecting audio cordsConnection of Input Equipment DJM-500Master level attenuator knob Connection of Outputs, Microphones, EtcFront section Name and Function of PartsMain Microphone Terminal and Microphone Control Knob Power Supply Switch PowerEffector Parameter/BPM Display Refer to Assign Switch Assign A, B = Headphone Terminal Phones ~ Channel Fader Volume@ Fader Start Switch Fader Start Refer to # Cross Fader Volume Cross FaderRear section Features of Various Effectors Using the Effect FunctionDelay one repeated sound Auto BPM Counter Auto BPM CounterAuto Pan L-R Balance Echo repeated soundsFlanger Pitch ShifterPress CH2 of the monitor selector auto BPM counter selector Measuring BPMSet the parameter value with the parameter knob delay time Operating Delay, Echo, Auto pan, FlangerTurn on the effect switch Precautions for Effect FunctionSet the parameter value pitch % using the parameter knob Using the External EffectorOperating Pitch Shifter and Reverb Set the parameter of the external effector, etcTurn off the cross fader switch Using the Fader Start FunctionStarting the Cross Fader Starting the Channel fader Fader Start PlayReplacement of Cross Fader Volume Control TroubleshootingAccessories SpecificationsAudio Section Electrical Section, Others95I00ZZ0C00
Top Page Image Contents