Pioneer DJM-500 Operating Pitch Shifter and Reverb, Using the External Effector

Page 16

USING THE EFFECT FUNCTION

Operating Pitch Shifter and Reverb

(Example) Pitch-shift the CH3 song by 90%.

1Set the effect selector to PITCH SHIFTER.

2Set the effect channel selector to CH3.

• The parameter LED 3 lights up.

* All the auto BPM counter displays go off.

3Set the parameter value (pitch %) using the parameter knob.

•To check the effect sound, press the effect of the moni- tor selector. This will enable the effect sound to be monitored using the headphone and booth monitor outputs.

4Turn on the effect switch.

•The effect switch blinks and the effect (pitch shift) is imposed on the master output. Each press will turn on or off the effects.

The reverb effects can be produced by operating in the same way.

Using the External Effector

(Example) Set the external effect for the CH3 song.

1Set the effect selector to SEND/RETURN.

2Set the effect channel selector to CH3.

• The parameter LED 3 lights up.

3Set the parameter of the external effector, etc.

•To check the effect sound, press the effect of the monitor selector. This will enable the effect sound to be monitored using the headphone and booth moni- tor outputs.

4Turn on the effect switch.

•The effect switch blinks and the effect (external ef- fect) is imposed on the master output. Each press will turn on or off the effects.

To use the auto BPM counter while using the external ef- fector, select one channel from CH1 to CH4 of the monitor selector (auto BPM counter selector).

•The LED of the channel selected by the auto BPM coun- ter lights up.

•The BPM of the song input to the channel will be dis- played on the auto BPM counter window (upper win- dow).

•Select the BPM display (real-time/average) with the switch button.

Real-time display : Displays the measured BPM value for every beat.

If it cannot be measured for more than 5 seconds, “– – –” will be displayed.

Average display : Measures and displays the average of the BPM values measured every beat. Continues displaying the previous BPM value when the average value could not be measured.

16

1

2

3

4

AUTO BPM COUNTER

REAL AVERAGE

MASTER

1 2 3 4 MIC

PARAMETER

%

1/2 3/4 1/1 2/1 4/1

BEAT

Display where CH3 has been pitch-shifted by 90%.

1 2 3 4

AUTO BPM COUNTER

Displays the channel and BPM selected with the monitor selector.

REAL AVERAGE

MASTER

1 2 3 4 MIC

PARAMETER

1/2 3/4 1/1 2/1 4/1

BEAT

<DRB1192>

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DJM-500 Pour le modèle Canadien For Canadian modelInformation to User We Want You Listening For a Lifetime Checking Accessories Cleaning the unitLocation CondensationFeatures Connecting audio cords ConnectionsConnection of Input Equipment DJM-500Connection of Outputs, Microphones, Etc Master level attenuator knobName and Function of Parts Front sectionMain Microphone Terminal and Microphone Control Knob Power Supply Switch PowerEffector Parameter/BPM Display Refer to = Headphone Terminal Phones ~ Channel Fader Volume Assign Switch Assign A, B@ Fader Start Switch Fader Start Refer to # Cross Fader Volume Cross FaderRear section Using the Effect Function Features of Various EffectorsDelay one repeated sound Auto BPM Counter Auto BPM CounterEcho repeated sounds Auto Pan L-R BalanceFlanger Pitch ShifterMeasuring BPM Press CH2 of the monitor selector auto BPM counter selectorOperating Delay, Echo, Auto pan, Flanger Set the parameter value with the parameter knob delay timeTurn on the effect switch Precautions for Effect FunctionUsing the External Effector Set the parameter value pitch % using the parameter knobOperating Pitch Shifter and Reverb Set the parameter of the external effector, etcUsing the Fader Start Function Turn off the cross fader switchStarting the Cross Fader Starting the Channel fader Fader Start PlayTroubleshooting Replacement of Cross Fader Volume ControlSpecifications AccessoriesAudio Section Electrical Section, Others95I00ZZ0C00
Top Page Image Contents