Pioneer DJM-500 Operating Delay, Echo, Auto pan, Flanger, Turn on the effect switch

Page 15

USING THE EFFECT FUNCTION

Operating Delay, Echo, Auto pan, Flanger

(Example) Impose the delay effects on the CH2 song.

1Set the effect selector to DELAY.

2Set the effect channel selector to CH2.

•The parameter LED 2 lights up.

•The time of 1 beat (mSec.) of the BPM of the song input to CH2 is displayed on the auto BPM counter window (upper window).

•Select the BPM display (real-time/average) with the switch button.

Real-time display : Displays the measured BPM value for every beat.

If it cannot be measured for more than 5 seconds, “– – –” will be displayed.

Average display : Measures and displays the aver- age of the BPM values measured every beat. Contin- ues displaying the previous BPM value when the av- erage value could not be measured.

3Set the parameter value with the parameter knob (delay time).

•When the parameter value (delay time) is set accord- ing to the time of 1 beat of the BPM displayed on the auto BPM counter window (upper window), higher effects are produced.

•When 1/2 delay time is set to the time of 1 beat of the measured BPM, the beat display 1/2 LED lights up.

Set the parameter value while referring to the beat display LED.

*When the BPM cannot be measured, the beat dis- play 1/2 to 4/1 LEDs will not light up.

•To check the effect sound, press the effect of the monitor selector. This will enable the effect sound to be monitored using the headphone output.

4Turn on the effect switch.

•The effect switch blinks and the effect (delay) is im- posed on the master output.

Each press will turn on or off the effects.

•By turning on the effects according to the beat, the effects' cycle will be synchronized with the beat to produce better effects.

The echo, auto pan, and flanger effects can be produced by operating in the same way.

1

2

3

4

AUTO BPM COUNTER

mSec

REAL AVERAGE

MASTER

1 2 3 4 MIC

PARAMETER

BPM

1/2 3/4 1/1 2/1 4/1

BEAT

Display where a half beat delay (250 mSec) has been set to the music with BPM of 120 (time conversion 500 mSec.)

Precautions for Effect Function

•When an effect function (delay, echo, reverb, etc.) is on and is switched using the effect channel selector, the re- maining effects of the channel before switching will be output completely.

•Use the effect selector while the effects are off (while the effect switch is lit).

If used while the effects are on (while the effect switch is blinking), noises may be produced.

15

<DRB1192>

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DJM-500 For Canadian model Pour le modèle CanadienInformation to User We Want You Listening For a Lifetime Condensation Checking AccessoriesCleaning the unit LocationFeatures DJM-500 Connecting audio cordsConnections Connection of Input EquipmentMaster level attenuator knob Connection of Outputs, Microphones, EtcFront section Name and Function of PartsPower Supply Switch Power Main Microphone Terminal and Microphone Control KnobEffector Parameter/BPM Display Refer to # Cross Fader Volume Cross Fader = Headphone Terminal Phones ~ Channel Fader VolumeAssign Switch Assign A, B @ Fader Start Switch Fader Start Refer toRear section Auto BPM Counter Auto BPM Counter Using the Effect FunctionFeatures of Various Effectors Delay one repeated soundPitch Shifter Echo repeated soundsAuto Pan L-R Balance FlangerPress CH2 of the monitor selector auto BPM counter selector Measuring BPMPrecautions for Effect Function Operating Delay, Echo, Auto pan, FlangerSet the parameter value with the parameter knob delay time Turn on the effect switchSet the parameter of the external effector, etc Using the External EffectorSet the parameter value pitch % using the parameter knob Operating Pitch Shifter and ReverbFader Start Play Using the Fader Start FunctionTurn off the cross fader switch Starting the Cross Fader Starting the Channel faderReplacement of Cross Fader Volume Control TroubleshootingElectrical Section, Others SpecificationsAccessories Audio Section95I00ZZ0C00
Top Page Image Contents