~CH2, Recalling Effects from the Memory, =J + G8

Choosing an Effect

Recalling Effects from the Memory

Outputting Without Effects (BYPASS/MUTE)

4Use the operation dial to select BYPAS or Mute.

The effector comes with 198 different effects stored in the preset memory as well as a 198 effect memory capacity for storing the effects you create.

-		Memory
		number
	POWER	Level meter display
	ij .	~
-		~.

You can use the following procedure to select effects from either the preset memory or the user memory banks.

Multi-display	Number
Multi-display	buttons	Shuttle ring

The effector comes with two different bypass modes, Bypass and Mute. Therefore, you can use the BYPASS button to cut output of the original sound or to output the original sound without effects depending on, which bypass mode you sell'Ct.

Once you set the BYPASS modc, just pre'Ss BYPASS to activate Byp"ss or Mute. Prt'Ss again to cancel the bypass or mute.

ystem:SypassMoae----------		j
BYPAS
1mmJ _
!;

select	when

BY PAS	you w,mt to output the original signal
	without adding any cfte'CtS. Only the
	original signal is output (Sl'\! "Bypass and
	Mute" on page 11).

INPUT	Bank	BANK	FUNCTION A·F	ENTER/SHIFT Operation dial
	indicators

BYPASS

Mute	you want to completely cut the sound
	output from the effl'Ct"r (including the
	input signal). We l'Specially rl'Commend

1 Press POWER to turn on the power.

The I'LA Y screen is qisplayed.

	Structure message
Category icon	(see page 19)	Memory name
	__l
........	Active parameters (see page 20)

2Turn INPUT to adjust the analog input levels (for digital levels, see page 13).

If the CLIP indicators light, the input level is set too high. Be sme to set the input level correctly since it has a direct relationship to the quality of the effects

(see page 10 for details).

	(H'
	-6
	CLIP.
~CH2	_-12
~CH2	Ir.)!: -24	I't"'t
CH1 ~	_ - 18 _
CH1 ~
	'"'" -30	1eI':!
	r~ -36	rot
	~{d81--'

3 Press BANK to select the memory bank containing the effect you want (PRESETI USER 1 or 2).

Only the bottom	Both the top and bottom
indicator lights for	indicators light for
PRESET or USER bank 1.	PRESET or USER bank 2.

2 l-:::>J	I;:__.~_~
,~_...:.._~f.~	I;:__.~_~
PRESET	PRESET

PRESET banks 1 and 2 hold preset effects.

USER banks I and 2 are for user memory.

4Select the effect you desire (1-99).

To select effects using the operation dial/shuttle ring, rotate the dial or ring to display the number of the effect you desire.

Operation dial

To select effects using the number buttons, input the number of the effect you want, then press ENTER. (If you press the wrong number, input the number again before pressing ENTER.)

CDo::JCD

CD CD CD + I ENTER)

CDCDCIJCD

To select effects using the arrow buttons, hold down SHiFf and press either ... or" until the number you desire appears in the display.

...

c=:J + G8

SHIFTIT)

Before you turn on the connected components

Be sure to turn the volume level down to avoid an uncxpl'ded output

of massive volume.

To change effect parameters from the PLAY screen St'l' "Editing in I'LA Y Mod.. (dire,,,t l'dit)" on page' 20.

Choosing the bypass mode

1 Press SYSTEM.

2 Press FUNCTION A to choose "Set Up."

System:......a ~ ~ ~ --:x

Set UP Memry Pedal MID I Morph

3Press FUNCTION C to choose "Bypass."

Setup

.. @ fI/\- Jjji1. liD Ge

Gate Bypass DISP Clock Dry off

using mute whe'll Ctlllnl'Cting the dft'Ctor ill a send-return loop with a mixer (as showil on p,'ge 12).

Press EXIT a few times to return to the PLAY screen.

14fN

1SEN