Stereo Link, Examples of Connections

Stereo Link

What’s Stereo Link?

This lets you use two KC-880 units to form a stereo PA system having a high output of 320 + 320 watts. This feature is called “Stereo Link.”

Two different connection methods are available for Stereo Link: basic connection using one 1/4” phone cable, and advanced connection using two 1/4” phone cables.

Making the connections using two 1/4” phone cables enables you to take full advantage of the mixing features of the two KC-880 units.

Examples of Connections

1. Basic Stereo Link

■If you want to connect input sources to the KC-880 (L)

Up to five input devices can be connected.

CH 1-4 AUX IN

2. Advanced Stereo Link

This arrangement lets you play in stereo, making maximum use of the two KC-880s’ mixer functions (with ten inputs).

CH 1-4 AUX IN

KC-880	KC-880
(L)	(R)
STEREO LINK	STEREO LINK
OUT R	IN

1.Connect the devices to the KC-880 (L).

2.Connect the STEREO LINK OUT R jack on the KC-880 (L) and the STEREO LINK IN jack on the KC-880 (R).

3.Turn on both KC-880 (L) and KC-880 (R).

4.Adjust the volume levels on all devices.

5.Adjust the KC-880 (L) and KC-880 (R) volume levels separately using their [VOLUME] knobs.

■If you want to connect input sources to the KC-880 (R)

As described in step 2 of example 1, connect the R side’s STEREO LINK OUT L jack to the L side’s STEREO LINK IN jack.

KC-880			KC-880
(L)			(R)
STEREO LINK	STEREO LINK	STEREO LINK	STEREO LINK
IN	OUT R	IN	OUT L

1.Connect the devices to the KC-880 (L) and KC- 880 (R).

2.Connect the STEREO LINK OUT R jack on the KC-880 (L) and the STEREO LINK IN jack on the KC-880 (R).

3.Connect the STEREO LINK OUT L jack on the KC-880 (R) and the STEREO LINK IN jack on the KC-880 (L).

4.Turn on both KC-880 (L) and KC-880 (R).

5.Adjust the volume levels on all devices.

6.Adjust the KC-880 (L) and KC-880 (R) volume levels separately using their [VOLUME] knobs.

About the Volume and Tone Settings

Adjust the R and L volume levels separately using their [VOLUME] knobs.

You can adjust the EQUALIZER ([LOW]/[MIDDLE]/[HIGH] knobs) independently for the L and R sides.

Basically, they should be set to the same positions, but you can adjust each one as necessary to suit the needs of a particular setup.