Pioneer VSX-D908S Remote Control of Other component, Recalling preset codes, Press Remote Setup

Remote Control of Other component

Setting Up the Remote Control to Control Other Components

In addition to controlling the receiver, the supplied remote control can operate your other components (VCR, TV, LD, CD, etc.) after you program it to do so. In this way, instead of fumbling with many different controls and buttons, you only need to use one remote control. If your component(s) are listed in the remote control’s memory, simply follow the steps below. If your component(s) are not listed, or if you want the remote to learn additional operations, you can use the learning mode to input the information from the remote controls supplied with your other components.

Recalling preset codes

The following steps show you how to recall preset codes stored in the remote control. Once a preset code is recalled and the component assigned, you can use this remote to easily operate the component.

See “Preset Code List” on p. 79 for the components and manufacturers available.

3

S0URCE			RECEIVER		1 Turn on your TV and the receiver.
			ë￿	1
	MULTI	SYSTEM			Make sure your TV is set to the appropriate video input (e.g. VIDEO
	OPERATION	OFF			1).
DVD/LD	TV/SAT	VCR1	VCR2
	MULTI CONTROL
CD	MD/	TUNER	TV CONT
	TAPE1
CLASS	MPX	BAND	DIRECT ACCESS		2 Press REMOTE SETUP.
- TUNING +		- STATION +
¦￿	7	3	8
1 Á￿ 4 ¢					The REMOTE SET UP menu appears on your TV screen.
DTV ON/OFF	DTV MENU	- CHANNEL +
1	2		3
4	5		6		Select Remote
					Setup Mode
7	8		9		Remote SETUP+1
GUIDE			EXIT
					Preset Recall
	0		ENTER
+10			DISC		Remote SETUP+2
	TV				Learning
TV VOL TV CONTROL			VOLUME		Remote SETUP+3
	TV FUNC
					Multi-Operation
					Remote SETUP+4
EFFECT	MENU		MUTE		Direct Function
/CH SEL

FUNCTION

2,3

	ENTER
	SIGNAL
	SELECT
	2/dts
SYSTEM	ADVANCED STANDARD
SETUP

REMOTE	MIDNIGHT	DSP	STEREO
SETUP
			DIGITAL NR
DIGITAL MULTI PROCESSING AMPLIFIER
	REMOTE CONTROL UNIT

You have four set up options:

1PRESET RECALL

2 LEARNING

3 MULTI OPERATION (See p.65)

4 DIRECT FUNCTION (See p.68)

PRESET RECALL and LEARNING are the two modes that teach the remote control to operate your other components. It’s easiest to start with PRESET RECALL and, if set up isn’t possible, move on to the LEARNING mode.

3Press REMOTE SETUP and 1 at the same time to select the PRESET RECALL SETUP mode.

All the MULTI CONTROL BUTTONS (except the TUNER button) start to blink.

To cancel the PRESET RECALL SETUP mode

Press REMOTE SET UP.

50