Pioneer VSX-D908S operating instructions Sound modes, Standard mode

Page 36

Basic Playback

Sound modes

The four sound modes on the VSX-D908S are explained here. These can be turned on from the front panel or from the remote control.

There are two cinema modes: STANDARD, and ADVANCED THEATER. These are designed to be used with multi channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes can deliver realistic and powerful surround sound that recreates the movie theater experience. You may need to experiment with them to see which settings suit your home system and personal tastes.

The DSP and STEREO modes are designed to be used with music sources but some DSP modes are also suited for film soundtracks. Again, try different settings with various soundtracks to see which you like.

You must choose one of the three cinema modes or the DSP mode in order to get surround sound. In STEREO mode only the front two speakers are used.

STANDARD mode

This mode is for pure decoding of Dolby Digital, DTS and Dolby Pro Logic. No special effects are added. It is good for enjoying movies that have been recorded in Dolby Digital, DTS or Surround.

ADVANCED THEATER modes

The Advanced Theater mode is a newly designed system for enhancing movie soundtracks and other audio- visual sources. It incorporates the use of DTS (Digital Theater System) as well as Dolby Digital into its sound processing. These functions switch on automatically when the source you are playing is encoded with DTS, Dolby Pro Logic or Dolby Digital (bearing the 1logo). There are four Advanced Theater settings that use DSP (Digital Signal Processing) to create different types of sound environments.

MUSICAL

This mode is primarily for music and adds a spacious feeling to the sound. A long delay time of reflected sounds, provides resonant tones which emulate a concert hall.

DRAMA (CINEMA)

This mode is designed for movies with a lot of dialog. The elements of dialog are enhanced, making the characters seem more real. The mode also compresses the dynamic range somewhat so loud sounds do not overpower softer ones (compare this with the MIDNIGHT mode explained on p.42).

ACTION

This mode is designed for action movies, which generally use lots of sound effects. The mode enriches the sound to make it more realistic and extends the parameters to pick up high and low sound effects.

5-D THEATER

This mode is especially designed to give sound depth to stereo sources. The overall effect builds a dynamic and broad sound space, allowing two-channel (stereo) signals to faithfully imitate a five speaker sound. The mode should be used in conjunction with Dolby Pro Logic for sources bearing the 3mark.

When a Dolby Digital soundtrack is played back the Dialog Normalization function of the receiver activates automatically. Dialog Normalization is a Dolby Digital function that establishes the average dialog level for the program source being played. If the receiver's level does not match the average dialog level, first you see "DIAL. NORM" flash in the receiver's display and next OFFSET +4 dB (as an example) will appear. The number +4 dB is the difference between the receiver's gain structure and the Dolby Digital average dialog level. To match the average dialog level, subtract or add the OFFSET level. For example, if the OFFSET level is +4 dB, the amplifier's output is 4 dB over the average recorded level.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents VSX-D908S For Canadian model This is for your securityImportant Safety Instructions Information to UserFeatures Table of Contents Checking the Supplied Accessories How to Use This ManualInstalling the Receiver Before You StartPreparing the Remote Control Operating range of remote control unitOpening the Front Panel Loading the batteriesConnecting Your Equipment Cassette deck placementAudio Components Audio cordsVideo Components FrontAudio/Video cords Digital Connections Digital audio cords/Optical cablesDigital audio cord Optical cable Or standard video cord Example of Connection Using a DVD/LD or LD player When playing LD recorded in Dolby DigitalDVD/LD player Or LD player RF demodulator RFD-1 External Decoder Input Components equipped with 5.1 channel analog output jacksUsing external antennas AntennasAM loop antenna To improve FM receptionTo be used as Center Speaker Powered sub woofer SpeakersFront Speakers a First turn the receiver off, then press the power button Speaker impedanceSpeaker terminals While holding down the Speakers buttonSpeaker placement Front CenterRight Sub WooferConnecting additional amplifiers Power connections AC OutletsSwitched Total 100 W 0.8 a MAX Unswitched 100 W 0.8 a MAXDisplays & Controls Display= LFE indicator ~ Tuner indicators@ Speaker indicators # H.P headphonesFront Panel = Master Volume Remote Control System SET UP button Remote Setup button# Master Volume button Signal Select buttonSurround Sound Set Up Setting Up for Surround SoundPress System Setup button On Screen DisplayGo on to the next page to continue set up Speaker Setting Select Speaker Setting with the 5´ buttonsPress Enter Front default setting is Large Center default setting is LargeSurround default setting is Large SUB Woofer default setting is YESChannel Delay Using the commands belowUse the 5´ buttons to select a speaker. Specify Distance from your listening position to each speakerSelect aTEST Tone mode Channel LevelAuto automatic Test Tone Manual manual Test ToneAuto mode Manu modeIf you are using a Sound Pressure Level SPL meter To exit before outputting the Test ToneSelect Exit to return to the System Setup Menu Crossover NetworkSpecify the crossover frequency for your small speakers Select Setting Start and press Enter Bass Peak Level ManagerPress Enter to return to the previous screen Range Control Use the 2 or 3 arrows to choose OFF, MID or MAXDigital-In Select Choose a Digital in and assign it an input functionBasic Playback Playing Sources with Stereo SoundStandard mode Sound modesStereo mode DSP modesHall JazzSelecting a Sound Mode Select the sound modeSurrround operation Playing Sources with Dolby Digital or DTS Sound For more see Sound Modes pSwitching ANALOG/DIGITAL Signal Input Analog DigitalReducing noise during playback Digital NR function Listening in Midnight Listening Mode Each press switches Midnight Listening mode on or offPress Midnight MidnightExternal decoder playback front panel only 96kHz24bit PerformancePress External Decorder External DecorderListening in Loudness Mode front panel only Adjusting bass and treble tone control front panel onlyDirect playback front panel only Adjusting the brightness of the display front panel only Press FL DimmerFL Dimmer Using the Tuner Automatic and Manual TuningMPX Mode Adjust the volumeDirect Access Tuning To cancel before inputting the frequencyPress Tuner Press Band button on the remote or the FM/AMUsing the front panel Memorizing Frequently Used StationsTune in the desired station Press Memory to activate the memory functionUsing the remote control Recalling Memorized StationsRemote Control of Other component Setting Up the Remote Control to Control Other ComponentsRecalling preset codes Press Remote SetupPress Remote Setup to exit the Preset Recall Setup mode Press the Multi Control button for the componentYou want to control Press the 5´ buttons repeatedly to display the nameRemote Setup menu appears on your TV screen To cancel Learning Setup modeSelected button continues to blink Press Remote Setup to exit the Learning Setup mode Press the button to be programmedInches To program additional operations for the current componentRemote Controlling Other Components DVD or LD player operationsSouce Enter Side A/BVCR & DVD video recorder operations SourceChannel -/+ Use to select channelsCD player operations DiscMD operations Disc DISP/CHARASTB satellite tuner operations GuideExit MenuSTB DTV operations Press to switch the TV on or off TV operationsDTV Menu DTV ON/OFFPress to switch the cassette deck on or off not Cassette deck operationsNumber buttons 1~6 Possible with all modelsUsing Other Functions Recording from Audio ComponentsRecord monitor Tape 2 Monitor Recording from Digital Audio Components Recording from Video Components To cancel MULTI-OPERATION Setup mode Press Remote SetupMulti Operations 47Press Remote Setup to exit the MULTI-OPERATION Setup mode Press the Multi Operation button on the remote controlPerforming multi operations Multi Control buttons start to blinkYou can repeat this process for up to five commands System OFFSetting up the direct function Using the system off buttonPress and hold both Remote Setup Remote Back LightOFF MID MAX Resetting the Remote Control Erasing the multi operationsErasing the learned remote control commands Erasing all signals learned & preset codesSet up example Multi-RoomMULTI-ROOM connections MULTI-ROOM set up Press System Setup on the remote controlUp mode and press Enter Select the Volume Level by using the 2´3 buttonsUsing the front panel with the MULTI-ROOM system Press the Multi Room & Source buttonPress the Control button DVD/LD TV/SAT CD VCR 1 Tuner MD/TAPEUsing the remote control with the MULTI-ROOM system Press Volume +/- to adjust the volumeClass Receiver Station +Control Techno Tidbits & Problem-solving Dolby DigitalLaser disc format Comparison with Dolby Pro Logic SurroundDolby Digital DTSDolby Pro Logic SurroundPreset Code List Device Manufacturer CodeDevice Troubleshooting Symptom Cause RemedyFM broadcasts AM broadcastsSymptomCause Specifications 0 4 2 1 1 4 0 EIA 99E00ZF0P00
Top Page Image Contents