Pioneer HTZ-55DV manual Using the wake up timer

Page 31

7 Using the Timer

Using the wake up timer

You can use the timer as an alarm clock to wake up to the sound of a disc loaded or the radio. If you have an external component operated by a separate timer, you can also set the source function to that.

Once the timer is active, it will switch the system on everyday at the set time.

Unlike an ordinary alarm clock, you need to set a system switch off time as well as a switch on time.

1Select the source that youÕd like to wake up to.

For a disc, press DVD; for the radio press TUNER. For an external component, press the corresponding button.

2Load a disc or tune to a radio station, then set the volume.

If you selected an external component, make the appropriate timer settings for it.

When setting the volume, remember things sound louder first thing in the morning!

3Press SYS then TIMER/CLOCK ADJ.

4Press the @ or # button until you see WAKE-UP SET in the display.

5Press ENTER.

The display shows a switch on time with the hour blinking.

6Set the switch on time.

Use %and Þto set the hour then press ENTER. Set the minute in the same way, pressing ENTER to finish.

• If you make a mistake, press TIMER/CLOCK ADJ and start again from step 3.

7Set the switch off time.

Set in the same way as the switch on time, pressing ENTER to finish.

• If you make a mistake, press TIMER/CLOCK ADJ and start again from step 3.

8Check the settings you just made.

The display should indicate that you set the wake up timer, then show the on time, the off time, the function (DVD, etc.), and the volume.

•There is no direct way to edit the timer settings. If you see that some timer setting is not what you’d intended, you’ll need to start the process again from the top.

9Switch the system into standby.

The timer will not work if the system is left on!

The standby light on the front panel lights green to indicate that the timer has been set.

Activating/deactivating the wake up timer

To activate the wake up timer, set the timer to ON. To deactivate it, set the timer to

OFF.

1Press SYS then TIMER/CLOCK ADJ.

2Press the @ or # button until you see TIMER ON or TIMER OFF in the display.

3Press ENTER.

31

En

Page 30 Page 32
Image 31
Page 30 Page 32
Contents HTZ-55DV Risk of Electric Shock Do not Open Information to UserInstallation Precautions Line Voltage Selector SwitchMains voltages in Saudi Arabia are 127 V and 220 V only Contents New graphical Setup Navigator FeaturesUsing this manual Connecting UpDiscs compatible with this system Hints on installationDisc tray Standby / on Press to switch the system on or into standby20 19 18 17 16 15 Remote control Enter Use to confirm menu choices, setups and so on Tip Switching on and setting the clockSwitching the time format IntroductionThis puts the remote into surround setup mode Setting up for surround soundSetting the speaker distances Press SYS, then SetupBalancing the surround sound When youre done, press Test Tone to turn off the test tonePress SYS then 2/DTS Using the setup navigator Basic playback controls Playing DVD Video discsPress DVD Load a DVD discControl Basic disc menu controlsPlaying CDs Eject and remove the disc before switching offLoad a CD Load a Video CD Playing Video CDsBasic PBC menu controls Improving FM stereo sound Listening to the radioListening to other components Switching between digital and analog sourcesYou can see the current level in the display Adjusting the bass and trebleUsing P.Bass ¥ Press SYS then P.BASS to switch P.BASS on or offEffects modes Press SYS then 2/DTS to select a sound modeHall Listening at low volumePress SYS then DSP to select a sound mode When youre done, pressTime search DVD and Video CD only Finding what you want on a discPress 3 to start/restart playback Programming playlists Switching camera angles DVD onlySwitching subtitles Switching audio language DVD onlyPlayer can memorize playlists for up to 24 DVD discs Programming a DVD playlistStart entering track numbers More programming optionsProgramming a CD/Video CD playlist Press Shift then PGMCD/Video CD Using repeat playUsing random play ¥ To cancel looping, press AÐB againBookmarking a place in a disc Memorizing disc settings DVD onlyScreen Displaying disc information Listening to station presets Saving station presetsUsing the wake up timer On time Off time Function DVD, etc Volume Using the sleep timerChecking the timer settings Display shows the timer settingsSelect DVD or Video V-2 as the digital source to record Making an audio or a video recordingSelect a source to record Prepare the program sourceOSD language Using the Setup menuOSD settings Setup Menu ModeTV Screen Size Video settingsAdjusting the video quality Angle Indicator ExpertLinear PCM Out Audio settingsLanguage settings Dolby Digital OutSubtitle Language Default Setting OnAuto Language Subtitle Off Expert Default Setting w/Subtitle LanguageDefault Setting Selected Subtitle DVD Language ExpertParental Lock Miscellaneous settingsChanging the parental lock level Input a new password, then press Enter Changing your passwordSelect Password Change Input your existing password, then pressDynamic Range Control Advanced sound settingsC. Medium mid setting LFE attenuatorAdvanced Sound Dual-mono settingPress and hold Remote Setup for three seconds Setting up the remote controlSetting up using component presets Switch on the component you are setting up this remote forYou can reassign these buttons Above example, press Reassigning a Multi Control buttonLED at the top of the remote will blink twice Press the Multi Control button which you want to changeUsing the number buttons, enter Learning directly from other remote controlsProgram commands for other components as required Controlling a component while playing another Deleting a single commandDeleting all commands for a component Press twice the command button you want to deleteLED at top of the remote will blink twice Clearing all remote control settingsChecking preset codes LED at top of the remote blinks twiceCD/MD/CD-R/VCR/LD player controls For deck one of a dual tape deck Cassette deck controlsPress to start playback Press to stop playback For deck two or any tape deck that can recordReturn DVD/DVR player controls13 E/CH+ 2/3/ENTERDTV controls Press to display information on cable TV Press to switch the TV or Catv between standby and onCable TV/satellite TV/TV controls Press to display or close the TV or Catv menuConnect to Audio 1 in or Audio 2 Connecting to a TV with an S-Video cordPlaying your TV through this system Watching TVConnecting an audio recorder Connecting Other ComponentsConnect as shown in the figure below Connecting outdoor antennasConnecting an outdoor AM Antenna Connecting an outdoor FM AntennaSwitching the TV system output Setting the display brightness¥ Press SYS then FL Dimmer Storing discs Disc lens cleanerDiscs to avoid Collection of chapters on a DVD disc. See also Chapter GlossaryLanguage DVD language code listDVD PLAYER/RECORDER Preset Code ListTelevision 3/4 CD Player 1/2 VCR 2/4 Manufacturer Code Troubleshooting Picture disturbance during playback or dark Remote control doesnt seem to workNo audio, or audio is distorted Noisy radio reception Resetting the systemAuto tuning does not pick up some stations Screen sizes and disc formatsDisplay Unit Component features & functionsSpecifications

HTZ-55DV specifications

The Pioneer HTZ-55DV is a comprehensive home theater system designed to elevate your audio-visual experience. This system integrates various technologies and features that cater to cinema enthusiasts and casual viewers alike, providing an immersive environment for enjoying movies, music, and games.

One of the standout features of the HTZ-55DV is its support for high-definition audio formats. With built-in Dolby Digital and DTS surround sound decoding capabilities, it can deliver rich, multi-dimensional soundscapes that place you at the center of the action. This creates an engaging listening experience that draws you into your favorite films or music tracks.

The system is equipped with a powerful amplifier and satellite speakers that work together to produce clear and dynamic audio. The subwoofer enhances the low-frequency response, ensuring that you feel the rumble of explosions or the depth of musical bass lines. The compact and stylish design of the satellite speakers allows them to blend seamlessly into any living space without compromising on audio quality.

Another significant aspect of the HTZ-55DV is its connectivity options. It features multiple HDMI inputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all through a single HDMI output to the TV. The inclusion of an USB port provides additional convenience, letting you play music directly from flash drives or external storage. Furthermore, the system supports various disc formats, including DVD and CD, ensuring versatility in media playback.

The HTZ-55DV also includes user-friendly features such as a graphical user interface and remote control, making it easy to navigate through different settings and options. The system’s setup process is straightforward, empowering users to create their ideal home theater environment without requiring extensive technical knowledge.

In terms of design, the Pioneer HTZ-55DV combines sleek aesthetics with practical functionality, making it an attractive addition to any room. Its compact form factor allows for easy placement in smaller spaces while still producing a robust audio output that belies its size.

Overall, the Pioneer HTZ-55DV stands out as a high-performance home theater system that offers a blend of advanced technologies, user-friendly features, and stylish design. Whether you are watching the latest blockbuster or enjoying your favorite music, this system delivers an exceptional audio-visual experience that enhances your entertainment enjoyment.
Top Page Image Contents