Pioneer HTZ-55DV manual Making an audio or a video recording, Select a source to record

Page 33

8 Making Recordings

Making an audio or a video recording

The following steps show you how to make an audio or a video recording from the built in tuner, DVD, CD or from an audio or video source connected to the system (CD player, satellite tuner, etc.). Recordings can be made to a recorder connected to the AUDIO 1 or VIDEO 1 inputs/outputs.

The system's volume, balance, bass, treble, Midnight and surround sound settings have no effect on the recording.

Notes

You can't record a source connected to the digital inputs from the analog outputs.

You can't record DTS encoded discs from the analog outputs.

1 Select a source to record.

Use the MULTI CONTROL buttons on the remote, or the FUNCTION button (remote or front panel) to select the source.

2Prepare the program source.

Tune to the radio station, load the CD, etc. For a video recording load the video, etc.

3Insert a blank tape, MD, etc. into the recorder connected to either AUDIO 1 or VIDEO 1 and set the recording levels.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically — check your video's instruction manual if you are unsure whether yours has manual controls.

4Start recording, then start playback of the source component.

Making a digital recording

The system has one optical digital audio output (for AUDIO 1). If you want to make a digital recording from this system hook up this optical output to the optical input of your digital recorder. The source (CD, DVD, etc.) must be digital also; this system doesn’t convert analog inputs to digital. If you’re recording from an external digital component, also make sure that you’ve selected the digital input for that component (see page 19).

Note: If you want to record DVD disc, check that the digital output settings correct. See page 36 for detailed instructions.

1Select DVD or VIDEO V-2 as the digital source to record.

Use the MULTI CONTROL buttons on the remote, or the FUNCTION button (remote or front panel) to select the source.

2Prepare the program source.

Load the CD, MD, etc.

3Insert a blank MD, CD-R, etc. into the recorder connected to the optical output of AUDIO 1.

4Start recording, then start playback of the source component.

See the instructions that came with your recorder for detailed instructions on recording.

33

En

Image 33
Contents HTZ-55DV Risk of Electric Shock Do not Open Information to UserLine Voltage Selector Switch Installation PrecautionsMains voltages in Saudi Arabia are 127 V and 220 V only Contents Using this manual FeaturesConnecting Up New graphical Setup NavigatorDiscs compatible with this system Hints on installationStandby / on Press to switch the system on or into standby Disc tray20 19 18 17 16 15 Remote control Enter Use to confirm menu choices, setups and so on Switching the time format Switching on and setting the clockIntroduction TipSetting the speaker distances Setting up for surround soundPress SYS, then Setup This puts the remote into surround setup modeWhen youre done, press Test Tone to turn off the test tone Balancing the surround soundPress SYS then 2/DTS Using the setup navigator Press DVD Playing DVD Video discsLoad a DVD disc Basic playback controlsControl Basic disc menu controlsEject and remove the disc before switching off Playing CDsLoad a CD Playing Video CDs Load a Video CDBasic PBC menu controls Improving FM stereo sound Listening to the radioListening to other components Switching between digital and analog sourcesUsing P.Bass Adjusting the bass and treble¥ Press SYS then P.BASS to switch P.BASS on or off You can see the current level in the displayEffects modes Press SYS then 2/DTS to select a sound modePress SYS then DSP to select a sound mode Listening at low volumeWhen youre done, press HallFinding what you want on a disc Time search DVD and Video CD onlyPress 3 to start/restart playback Switching subtitles Switching camera angles DVD onlySwitching audio language DVD only Programming playlistsPlayer can memorize playlists for up to 24 DVD discs Programming a DVD playlistProgramming a CD/Video CD playlist More programming optionsPress Shift then PGM Start entering track numbersUsing random play Using repeat play¥ To cancel looping, press AÐB again CD/Video CDMemorizing disc settings DVD only Bookmarking a place in a discScreen Displaying disc information Listening to station presets Saving station presetsUsing the wake up timer Checking the timer settings Using the sleep timerDisplay shows the timer settings On time Off time Function DVD, etc VolumeSelect a source to record Making an audio or a video recordingPrepare the program source Select DVD or Video V-2 as the digital source to recordOSD settings Using the Setup menuSetup Menu Mode OSD languageAdjusting the video quality Video settingsAngle Indicator Expert TV Screen SizeLanguage settings Audio settingsDolby Digital Out Linear PCM OutDefault Setting On Subtitle LanguageAuto Language Default Setting Selected Subtitle Default Setting w/Subtitle LanguageDVD Language Expert Subtitle Off ExpertMiscellaneous settings Parental LockChanging the parental lock level Select Password Change Changing your passwordInput your existing password, then press Input a new password, then press EnterC. Medium mid setting Advanced sound settingsLFE attenuator Dynamic Range ControlAdvanced Sound Dual-mono settingSetting up using component presets Setting up the remote controlSwitch on the component you are setting up this remote for Press and hold Remote Setup for three secondsLED at the top of the remote will blink twice Reassigning a Multi Control buttonPress the Multi Control button which you want to change You can reassign these buttons Above example, pressLearning directly from other remote controls Using the number buttons, enterProgram commands for other components as required Deleting all commands for a component Deleting a single commandPress twice the command button you want to delete Controlling a component while playing anotherChecking preset codes Clearing all remote control settingsLED at top of the remote blinks twice LED at top of the remote will blink twiceCD/MD/CD-R/VCR/LD player controls Press to start playback Press to stop playback Cassette deck controlsFor deck two or any tape deck that can record For deck one of a dual tape deck13 E/CH+ DVD/DVR player controls2/3/ENTER ReturnDTV controls Cable TV/satellite TV/TV controls Press to switch the TV or Catv between standby and onPress to display or close the TV or Catv menu Press to display information on cable TVPlaying your TV through this system Connecting to a TV with an S-Video cordWatching TV Connect to Audio 1 in or Audio 2Connecting an audio recorder Connecting Other ComponentsConnecting an outdoor AM Antenna Connecting outdoor antennasConnecting an outdoor FM Antenna Connect as shown in the figure belowSetting the display brightness Switching the TV system output¥ Press SYS then FL Dimmer Disc lens cleaner Storing discsDiscs to avoid Collection of chapters on a DVD disc. See also Chapter GlossaryLanguage DVD language code listDVD PLAYER/RECORDER Preset Code ListTelevision 3/4 CD Player 1/2 VCR 2/4 Manufacturer Code Troubleshooting Remote control doesnt seem to work Picture disturbance during playback or darkNo audio, or audio is distorted Auto tuning does not pick up some stations Resetting the systemScreen sizes and disc formats Noisy radio receptionDisplay Unit Component features & functionsSpecifications

HTZ-55DV specifications

The Pioneer HTZ-55DV is a comprehensive home theater system designed to elevate your audio-visual experience. This system integrates various technologies and features that cater to cinema enthusiasts and casual viewers alike, providing an immersive environment for enjoying movies, music, and games.

One of the standout features of the HTZ-55DV is its support for high-definition audio formats. With built-in Dolby Digital and DTS surround sound decoding capabilities, it can deliver rich, multi-dimensional soundscapes that place you at the center of the action. This creates an engaging listening experience that draws you into your favorite films or music tracks.

The system is equipped with a powerful amplifier and satellite speakers that work together to produce clear and dynamic audio. The subwoofer enhances the low-frequency response, ensuring that you feel the rumble of explosions or the depth of musical bass lines. The compact and stylish design of the satellite speakers allows them to blend seamlessly into any living space without compromising on audio quality.

Another significant aspect of the HTZ-55DV is its connectivity options. It features multiple HDMI inputs, allowing users to connect several devices, such as Blu-ray players, gaming consoles, and streaming devices, all through a single HDMI output to the TV. The inclusion of an USB port provides additional convenience, letting you play music directly from flash drives or external storage. Furthermore, the system supports various disc formats, including DVD and CD, ensuring versatility in media playback.

The HTZ-55DV also includes user-friendly features such as a graphical user interface and remote control, making it easy to navigate through different settings and options. The system’s setup process is straightforward, empowering users to create their ideal home theater environment without requiring extensive technical knowledge.

In terms of design, the Pioneer HTZ-55DV combines sleek aesthetics with practical functionality, making it an attractive addition to any room. Its compact form factor allows for easy placement in smaller spaces while still producing a robust audio output that belies its size.

Overall, the Pioneer HTZ-55DV stands out as a high-performance home theater system that offers a blend of advanced technologies, user-friendly features, and stylish design. Whether you are watching the latest blockbuster or enjoying your favorite music, this system delivers an exceptional audio-visual experience that enhances your entertainment enjoyment.